AS 3740:2021 Waterproofing of Domestic Wet Areas
AS 3740:2021, the Australian Standard for waterproofing domestic wet areas: risk categories for showers, bathrooms and laundries, falls to wastes, approved waterproof and water-resistant materials, membrane installation and curing, termination heights, waterstops, door openings, bond breakers, junctions, penetrations, baths, spas, shower bases and screens, vinyl, polished concrete and floor heating, and membrane continuity testing.
AS 3740:2021 Waterproofing of Domestic Wet Areas is a compliance framework from Australia with 6 domains and 58 controls. The largest domains are Section 4: Installation - penetrations, baths, shower bases, screens and floor finishes – AS 3740:2021 Waterproofing of Domestic Wet Areas (15 controls), Section 4: Installation - terminations, waterstops, openings and junctions – AS 3740:2021 Waterproofing of Domestic Wet Areas (14 controls), Section 4: Installation - substrates, drainage connections and membranes – AS 3740:2021 Waterproofing of Domestic Wet Areas (11 controls). Every control below carries what it requires and what an assessor expects to see.
Framework summaries on this platform are AI-assisted interpretations for educational and compliance planning purposes. They do not reproduce or replace the official standards. Refer to the authoritative source for the definitive text. Framework names and trademarks belong to their respective organisations.
Framework Domains (6)
Appendices – AS 3740:2021 Waterproofing of Domestic Wet Areas
| Code | Title |
|---|---|
| as-3740-2021-waterproofing-of-domestic-wet-areas::APP-C | Appendix C (normative) Membrane continuity testing methods |
Section 2: Design – AS 3740:2021 Waterproofing of Domestic Wet Areas
| Code | Title |
|---|---|
| as-3740-2021-waterproofing-of-domestic-wet-areas::2.1.1 | 2.1.1 Design principles: retaining water in the Category 1 area |
| as-3740-2021-waterproofing-of-domestic-wet-areas::2.1.2 | 2.1.2 Material selection: compatibility and resistance to movement and exposure |
| as-3740-2021-waterproofing-of-domestic-wet-areas::2.2.1 | 2.2.1 Enclosed showers: screen prevents water spreading |
| as-3740-2021-waterproofing-of-domestic-wet-areas::2.2.2 | 2.2.2 Unenclosed showers: Type 1 and Type 2 classification |
| as-3740-2021-waterproofing-of-domestic-wet-areas::2.3.1 | 2.3.1 Falls in the substrate under the membrane |
| as-3740-2021-waterproofing-of-domestic-wet-areas::2.3.2 | 2.3.2 Falls in shower floor finishes (Category 1) |
| as-3740-2021-waterproofing-of-domestic-wet-areas::2.3.3 | 2.3.3 Falls in Category 2 floors next to a shower where a floor waste is fitted |
| as-3740-2021-waterproofing-of-domestic-wet-areas::2.3.4 | 2.3.4 Category 3 floors without a floor waste |
| as-3740-2021-waterproofing-of-domestic-wet-areas::2.3.5 | 2.3.5 Whole bathroom designed as an unenclosed shower |
Section 3: Materials – AS 3740:2021 Waterproofing of Domestic Wet Areas
| Code | Title |
|---|---|
| as-3740-2021-waterproofing-of-domestic-wet-areas::3.2 | 3.2 Compatibility of system components |
| as-3740-2021-waterproofing-of-domestic-wet-areas::3.3.1 | 3.3.1 Materials deemed waterproof |
| as-3740-2021-waterproofing-of-domestic-wet-areas::3.3.2 | 3.3.2 Water-resistant substrates for walls and floors |
| as-3740-2021-waterproofing-of-domestic-wet-areas::3.3.3 | 3.3.3 Water-resistant surface materials |
| as-3740-2021-waterproofing-of-domestic-wet-areas::3.4 | 3.4 Preformed and prefinished shower bases and enclosures |
| as-3740-2021-waterproofing-of-domestic-wet-areas::3.5 | 3.5 Sealants |
| as-3740-2021-waterproofing-of-domestic-wet-areas::3.6 | 3.6 Fastenings for substrate sheet linings |
| as-3740-2021-waterproofing-of-domestic-wet-areas::3.7 | 3.7 Adhesives |
Section 4: Installation - penetrations, baths, shower bases, screens and floor finishes – AS 3740:2021 Waterproofing of Domestic Wet Areas
Section 4: Installation - substrates, drainage connections and membranes – AS 3740:2021 Waterproofing of Domestic Wet Areas
| Code | Title |
|---|---|
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.2 | 4.2 Membrane position relative to tile bed or screed |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.3.1 | 4.3.1 Membrane to drainage connection at leak control flanges |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.3.2 | 4.3.2 Linear drainage connections |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.4.1 | 4.4.1 Surface preparation and substrate falls |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.4.3 | 4.4.3 Moisture content of substrates |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.4.4 | 4.4.4 Wall sheeting preparation |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.4.5 | 4.4.5 Render preparation |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.5.1 | 4.5.1 Installing an external membrane |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.5.2 | 4.5.2 Curing of membranes |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.5.3 | 4.5.3 Membrane inspection before overlay |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.5.4 | 4.5.4 Additional membrane continuity testing (when carried out) |
Section 4: Installation - terminations, waterstops, openings and junctions – AS 3740:2021 Waterproofing of Domestic Wet Areas
| Code | Title |
|---|---|
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.10 | 4.10 Fillets and bond breakers for bonded membranes |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.11.1 | 4.11.1 Types of junctions, transitions and terminations |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.11.2 | 4.11.2 Vertical flashing at shower wall junctions |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.6.1 | 4.6.1 Membrane termination at shower waterstops |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.6.2 | 4.6.2 Membrane termination at showers with hobs |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.6.3 | 4.6.3 Vertical membrane termination heights |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.7 | 4.7 Hob construction |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.8.1 | 4.8.1 Waterstops: general |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.8.2 | 4.8.2 Waterstops for unenclosed showers |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.8.3 | 4.8.3 Waterstops for enclosed showers |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.8.4 | 4.8.4 Waterstops for enclosed showers without hobs or set-downs |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.8.5 | 4.8.5 Showers within 200 mm of an exit from the wet area |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.9.1 | 4.9.1 Perimeter flashing and waterstops at floor-level door openings |
| as-3740-2021-waterproofing-of-domestic-wet-areas::4.9.2 | 4.9.2 Protecting door frames and architraves |
What is AS 3740:2021 Waterproofing of Domestic Wet Areas and who does it apply to?
AS 3740:2021 Waterproofing of Domestic Wet Areas is a compliance framework from Australia with 6 domains and 58 controls. AS 3740:2021, the Australian Standard for waterproofing domestic wet areas: risk categories for showers, bathrooms and laundries, falls to wastes, approved waterproof and water-resistant materials, membrane installation and curing, termination heights, waterstops, door openings, bond breakers, junctions, penetrations, baths, spas, shower bases and screens, vinyl, polished concrete and floor heating, and membrane continuity testing. It is used by organisations to establish and maintain compliance with industry standards and regulatory requirements.
What does AS 3740:2021 Waterproofing of Domestic Wet Areas actually require?
AS 3740:2021 Waterproofing of Domestic Wet Areas has 58 controls organised across 6 domains. The largest domains are Section 4: Installation - penetrations, baths, shower bases, screens and floor finishes – AS 3740:2021 Waterproofing of Domestic Wet Areas (15 controls), Section 4: Installation - terminations, waterstops, openings and junctions – AS 3740:2021 Waterproofing of Domestic Wet Areas (14 controls), Section 4: Installation - substrates, drainage connections and membranes – AS 3740:2021 Waterproofing of Domestic Wet Areas (11 controls). Each control defines specific requirements that organisations must implement to achieve compliance.
If I already comply with another framework, how much of AS 3740:2021 Waterproofing of Domestic Wet Areas do I already cover?
AS 3740:2021 Waterproofing of Domestic Wet Areas does not currently have cross-framework mappings in our system. Check back as we continuously expand our mapping database.
How do I implement AS 3740:2021 Waterproofing of Domestic Wet Areas?
Start your AS 3740:2021 Waterproofing of Domestic Wet Areas compliance journey by running a self-assessment on our platform to identify your current compliance posture. Our AI advisory can answer specific questions about AS 3740:2021 Waterproofing of Domestic Wet Areas requirements, and cross-framework mapping helps you leverage existing controls from other frameworks you may already comply with. Create a free account to access all 58 controls and track your progress.
Start Your Compliance Journey
Create a free account to run self-assessments, get AI advisory, and track your compliance progress across 868 frameworks.
Get Started Free →Free forever — no credit card required