AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
The Australian and New Zealand plumbing standard for cold and non-drinking water services: materials, pipe sizing, pressure and velocity limits, cross-connection control and backflow devices, installation and separation from other services, tanks, recycled and rainwater systems, flushing, pumps, meters, testing and disinfection.
AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services is a compliance framework from Australia and New Zealand with 17 domains and 73 controls. The largest domains are Section 5: Installation of cold water services – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services (21 controls), Section 4: Cross-connection control and backflow prevention – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services (10 controls), Section 2: Materials and products – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services (7 controls). Every control below carries what it requires and what an assessor expects to see.
Framework summaries on this platform are AI-assisted interpretations for educational and compliance planning purposes. They do not reproduce or replace the official standards. Refer to the authoritative source for the definitive text. Framework names and trademarks belong to their respective organisations.
Framework Domains (17)
Section 10: Treated greywater services – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::10 | 10 Treated greywater services |
Section 11: Water for sanitary flushing – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::11.2-11.3 | 11.2 and 11.3 Sanitary flushing supply and water closets |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::11.4 | 11.4 Urinals |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::11.5 | 11.5 Installation of cisterns |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::11.6 | 11.6 Flush valves supplied from break tanks |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::11.7-11.8 | 11.7 and 11.8 Flush pipes, water distribution and pressure ratio valves |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::11.9 | 11.9 Flush valves connected to the drinking water service |
Section 12: Pumps – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::12 | 12 Pumps |
Section 13: Water requirements for haemodialysis machines – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::13 | 13 Water supply to haemodialysis machines |
Section 14: Property water meters – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::14 | 14 Property water meters |
Section 15: Water supply from rainwater tanks – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::15 | 15 Water supply from rainwater tanks |
Section 16: Multi-unit developments – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::16 | 16 Multi-unit developments |
Section 17: Testing and commissioning – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::17.2-17.3 | 17.2 and 17.3 Flushing and hydrostatic testing |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::17.4-17.6 | 17.4 to 17.6 Cleaning, disinfection and commissioning |
Section 2: Materials and products – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::2.2 | 2.2 Materials and products fit for purpose |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::2.3 | 2.3 General limitations on pipes and fittings |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::2.4 | 2.4 Metallic pipes and fittings |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::2.5 | 2.5 Plastics pipes and fittings |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::2.6 | 2.6 Safe-tray materials |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::2.7 | 2.7 Joints: flanges, seals, brazing alloys, solvent cement and filler rods |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::2.8 | 2.8 Miscellaneous materials: concrete, mortar, water, timber, coatings, marking tape |
Section 3: Sizing of water services – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::3.2 | 3.2 Flow requirements: flow rates, loading units and simultaneous demand |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::3.3 | 3.3 Pressure requirements |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::3.4 | 3.4 Velocity requirements |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::3.5 | 3.5 Pipe size limitations: water service and branch offtakes |
Section 4: Cross-connection control and backflow prevention – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::4.2 | 4.2 Protection of water supplies |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::4.3 | 4.3 Cross-connection hazard rating |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::4.4.1 | 4.4.1 Provision of backflow prevention devices (individual, zone and containment) |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::4.4.3 | 4.4.3 Hose taps near zone-protected areas |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::4.4.5 | 4.4.5 Water downstream of a backflow prevention device |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::4.4.6 | 4.4.6 Commissioning and maintenance program for testable devices |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::4.5 | 4.5 Suitability of devices for hazards |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::4.6.1 | 4.6.1 General installation requirements for backflow devices |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::4.6.2 | 4.6.2 Location, accessibility and drainage of backflow devices |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::4.6.3 | 4.6.3 Specific installation requirements for testable and non-testable devices |
Section 5: Installation of cold water services – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
Section 6: Fire services – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::6.2-6.3 | 6.2 and 6.3 Fire services: materials, products and installation |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::6.4-6.5 | 6.4 and 6.5 Fire service water storage tanks and identification |
Section 7: Irrigation and lawn watering systems – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::7.2-7.3 | 7.2 and 7.3 Irrigation system types and backflow protection |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::7.4 | 7.4 Irrigation materials |
Section 8: Water storage tanks – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::8.2 | 8.2 Purpose of tanks and limitations on use |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::8.3 | 8.3 Tank design and installation: support, access, placement |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::8.4 | 8.4 Tank design: corrosion protection, covers and overflows |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::8.5-8.6 | 8.5 and 8.6 Tank inlet and outlet piping |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::8.7-8.8 | 8.7 and 8.8 Sludge valves and safe-trays |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::8.9 | 8.9 Marking of tanks |
Section 9: Non-drinking water services – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::9.2 | 9.2 Non-drinking water materials, products and meters |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::9.3 | 9.3 Non-drinking water installation and proximity to other services |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::9.4 | 9.4 Non-drinking water cross-connection control |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::9.5 | 9.5 Temporary bypass |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::9.6-9.7 | 9.6 and 9.7 Identification of non-drinking pipework and outlets |
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::9.8 | 9.8 Testing and commissioning a non-drinking water service |
Status, scope and application – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services
| Code | Title |
|---|---|
| as-nzs-3500-1-2021-plumbing-and-drainage-water-services::1.6 | 1.6 Equivalent pipe sizes |
What is AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services and who does it apply to?
AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services is a compliance framework from Australia and New Zealand with 17 domains and 73 controls. The Australian and New Zealand plumbing standard for cold and non-drinking water services: materials, pipe sizing, pressure and velocity limits, cross-connection control and backflow devices, installation and separation from other services, tanks, recycled and rainwater systems, flushing, pumps, meters, testing and disinfection. It is used by organisations to establish and maintain compliance with industry standards and regulatory requirements.
What does AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services actually require?
AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services has 73 controls organised across 17 domains. The largest domains are Section 5: Installation of cold water services – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services (21 controls), Section 4: Cross-connection control and backflow prevention – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services (10 controls), Section 2: Materials and products – AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services (7 controls). Each control defines specific requirements that organisations must implement to achieve compliance.
If I already comply with another framework, how much of AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services do I already cover?
AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services does not currently have cross-framework mappings in our system. Check back as we continuously expand our mapping database.
How do I implement AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services?
Start your AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services compliance journey by running a self-assessment on our platform to identify your current compliance posture. Our AI advisory can answer specific questions about AS/NZS 3500.1:2021 Plumbing and Drainage - Water Services requirements, and cross-framework mapping helps you leverage existing controls from other frameworks you may already comply with. Create a free account to access all 73 controls and track your progress.
Start Your Compliance Journey
Create a free account to run self-assessments, get AI advisory, and track your compliance progress across 844 frameworks.
Get Started Free →Free forever — no credit card required