UK Security and Emergency Measures Direction (SEMD) - Water Industry
The Security and Emergency Measures (Water and Sewerage Undertakers and Water Supply Licensees) Direction 2022, given under section 208 of the Water Industry Act 1991 by Defra and the Welsh Ministers and amended from 5 December 2024, regulated by the Drinking Water Inspectorate. Water and sewerage undertakers and wholesale water supply licensees must keep senior-signed emergency and security plans (continuity of supply, alternative supplies to a notified minimum, vulnerable customers, sewerage pollution, trained staff, strategic stores, command and control), test them and share them on request; identify and mitigate security risks to functions, assets and supply chains using up-to-date technology, review CNI risk assessments annually, maintain personnel security and clearances, document and test security measures; cooperate with government, respond to incidents, notify at once with a report within three days (and 20 days on request), file an annual compliance statement by 1 April and audit critical national infrastructure annually with external review.
UK Security and Emergency Measures Direction (SEMD) - Water Industry is a compliance framework from England and Wales with 5 domains and 22 controls that map to 119 other frameworks. The largest domains are Emergency planning and facilities (paragraphs 4 to 6) – UK Security and Emergency Measures Direction (SEMD) - Water Industry (9 controls), Security risk, assets and personnel (paragraphs 7 to 10, 13) – UK Security and Emergency Measures Direction (SEMD) - Water Industry (5 controls), Cooperation, response and notification (paragraphs 14 to 16) – UK Security and Emergency Measures Direction (SEMD) - Water Industry (3 controls). Every control below carries what it requires and what an assessor expects to see.
Framework summaries on this platform are interpretations grounded in the published source, for educational and compliance planning purposes. They do not reproduce or replace the official standards. Refer to the authoritative source for the definitive text. Framework names and trademarks belong to their respective organisations.
Framework Domains (5)
Cooperation, response and notification (paragraphs 14 to 16) – UK Security and Emergency Measures Direction (SEMD) - Water Industry
| Code | Title |
|---|---|
| uk-security-and-emergency-measures-direction-semd-water-industry::14 | Cooperation, information sharing and staff support |
| uk-security-and-emergency-measures-direction-semd-water-industry::15 | Responding to incidents |
| uk-security-and-emergency-measures-direction-semd-water-industry::16 | Notification and incident reports |
Emergency planning and facilities (paragraphs 4 to 6) – UK Security and Emergency Measures Direction (SEMD) - Water Industry
General duty and security governance – UK Security and Emergency Measures Direction (SEMD) - Water Industry
| Code | Title |
|---|---|
| uk-security-and-emergency-measures-direction-semd-water-industry::11 | Security governance and readiness |
| uk-security-and-emergency-measures-direction-semd-water-industry::12 | Security policies, practices and procedures |
| uk-security-and-emergency-measures-direction-semd-water-industry::3 | Regard to guidance and long-term risks |
Reporting and critical national infrastructure audit (paragraphs 17 and 18) – UK Security and Emergency Measures Direction (SEMD) - Water Industry
| Code | Title |
|---|---|
| uk-security-and-emergency-measures-direction-semd-water-industry::17 | Annual compliance statement and reporting |
| uk-security-and-emergency-measures-direction-semd-water-industry::18 | Annual audit of critical national infrastructure |
Security risk, assets and personnel (paragraphs 7 to 10, 13) – UK Security and Emergency Measures Direction (SEMD) - Water Industry
| Code | Title |
|---|---|
| uk-security-and-emergency-measures-direction-semd-water-industry::10 | Personnel security and incident reporting |
| uk-security-and-emergency-measures-direction-semd-water-industry::13 | Testing security measures |
| uk-security-and-emergency-measures-direction-semd-water-industry::7 | Identifying and mitigating security risks |
| uk-security-and-emergency-measures-direction-semd-water-industry::8 | Securing critical assets and supporting infrastructure |
| uk-security-and-emergency-measures-direction-semd-water-industry::9 | Risk assessment records and review cycle |
Your Compliance Coverage
If you comply with UK Security and Emergency Measures Direction (SEMD) - Water Industry, you already cover:
NIST Cybersecurity Framework 2.0
14%
6 controls mapped
Compare →Security of Critical Infrastructure Act 2018 (SOCI)
14%
6 controls mapped
Compare →NIST SP 800-53 Rev 5
12%
5 controls mapped
Compare →+ 116 more: SOC for Cybersecurity - Cybersecurity Risk Management Examination (12%), SSAE 18 - Attestation Standards (SOC Reporting) (12%)
See all 119 mapped frameworks ↓Maps to 119 other frameworks
Coverage is not the same as your position
This page shows what UK Security and Emergency Measures Direction (SEMD) - Water Industry overlaps with in general. Where your organisation actually stands, against the standard you are going for and the certifications you already hold, is a different question. Same graph and the same recorded refutations, scoped to you rather than to a pair.
The Compliance Position Diagnostic, $5,000 fixed, ten business daysWhat is UK Security and Emergency Measures Direction (SEMD) - Water Industry and who does it apply to?
UK Security and Emergency Measures Direction (SEMD) - Water Industry is a compliance framework from England and Wales with 5 domains and 22 controls. The Security and Emergency Measures (Water and Sewerage Undertakers and Water Supply Licensees) Direction 2022, given under section 208 of the Water Industry Act 1991 by Defra and the Welsh Ministers and amended from 5 December 2024, regulated by the Drinking Water Inspectorate. Water and sewerage undertakers and wholesale water supply licensees must keep senior-signed emergency and security plans (continuity of supply, alternative supplies to a notified minimum, vulnerable customers, sewerage pollution, trained staff, strategic stores, command and control), test them and share them on request; identify and mitigate security risks to functions, assets and supply chains using up-to-date technology, review CNI risk assessments annually, maintain personnel security and clearances, document and test security measures; cooperate with government, respond to incidents, notify at once with a report within three days (and 20 days on request), file an annual compliance statement by 1 April and audit critical national infrastructure annually with external review. It is used by organisations to establish and maintain compliance with industry standards and regulatory requirements.
What does UK Security and Emergency Measures Direction (SEMD) - Water Industry actually require?
UK Security and Emergency Measures Direction (SEMD) - Water Industry has 22 controls organised across 5 domains. The largest domains are Emergency planning and facilities (paragraphs 4 to 6) – UK Security and Emergency Measures Direction (SEMD) - Water Industry (9 controls), Security risk, assets and personnel (paragraphs 7 to 10, 13) – UK Security and Emergency Measures Direction (SEMD) - Water Industry (5 controls), Cooperation, response and notification (paragraphs 14 to 16) – UK Security and Emergency Measures Direction (SEMD) - Water Industry (3 controls). Each control defines specific requirements that organisations must implement to achieve compliance.
If I already comply with another framework, how much of UK Security and Emergency Measures Direction (SEMD) - Water Industry do I already cover?
UK Security and Emergency Measures Direction (SEMD) - Water Industry maps to 119 other compliance frameworks. The top mapping partners are NIST Cybersecurity Framework 2.0 (14% coverage), Security of Critical Infrastructure Act 2018 (SOCI) (14% coverage), NIST SP 800-53 Rev 5 (12% coverage). Use our comparison tool to explore control-level mappings between frameworks.
How do I implement UK Security and Emergency Measures Direction (SEMD) - Water Industry?
Start your UK Security and Emergency Measures Direction (SEMD) - Water Industry compliance journey by running a self-assessment on our platform to identify your current compliance posture. Our AI advisory can answer specific questions about UK Security and Emergency Measures Direction (SEMD) - Water Industry requirements, and cross-framework mapping helps you leverage existing controls from other frameworks you may already comply with. Create a free account to access all 22 controls and track your progress.
Start Your Compliance Journey
Create a free account to run self-assessments, get AI advisory, and track your compliance progress across 1,121 frameworks.
Get Started Free →Free forever, no credit card required