Cross-Framework Mapping

NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) SecurityvsNIST Privacy Framework

See exactly how NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security controls map to NIST Privacy Framework. Pre-computed mappings, identified gaps, and coverage analysis.

12
Controls Mapped
0
Gaps Found
75%
Coverage

Need this as a report you can hand to an assessor? A coverage crosswalk for this pair can be built to order.

According to the TheArtOfService Compliance Knowledge Graph:

NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security maps to NIST Privacy Framework with 75% coverage across 6 directly mapped controls. Analysis of 8 NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security controls identifies 2 compliance gaps, primarily concentrated in OT Supply Chain, Lifecycle, Physical.

Source: TheArtOfService Knowledge Graph | 8 controls analysed | 686 frameworks | 310K+ cross-framework mappings

Control Mappings

Showing 12 of 12 mapped controls across 6 domains. Sign up to explore all 310K+ mappings across 686 frameworks.

OT Security Program Governance(4 mappings)

NISTSP82-1OT Security Program Governance, Policy, Roles, and Safety-Security Integration4 targets
NISTPF-2Govern-P - Governance Policies, Risk Management Strategy, Awareness Training, and Monitoring
NISTPF-6Protect-P Data Security (PR.DS-P)
NISTPF-7Protect-P Maintenance and Protective Technology (PR.MA-P, PR.PT-P)
NISTPF-8Protect-P Information Protection Processes (PR.PO-P)

OT Risk Assessment(1 mappings)

NISTSP82-2OT Risk Assessment and Threat/Vulnerability Identification
NISTPF-5Protect-P Access Control (PR.AC-P)

OT Access Control and IAM(2 mappings)

NISTSP82-4OT Access Control, Identity, Authentication, and Remote Access2 targets
NISTPF-3Control-P - Privacy Controls, Data Management, and Disassociated Processing
NISTPF-5Protect-P Access Control (PR.AC-P)

OT Config, Patch, Vulnerability, Malware(3 mappings)

NISTSP82-5OT Configuration Management, Patching, Vulnerability Management, and Malware Protection3 targets
NISTPF-6Protect-P Data Security (PR.DS-P)
NISTPF-7Protect-P Maintenance and Protective Technology (PR.MA-P, PR.PT-P)
NISTPF-8Protect-P Information Protection Processes (PR.PO-P)

OT Audit, Monitoring, Anomaly Detection(1 mappings)

NISTSP82-6OT Audit, Monitoring, Anomaly Detection, and OT-Specific SOC
NISTPF-8Protect-P Information Protection Processes (PR.PO-P)

OT Incident Response and Recovery(1 mappings)

NISTSP82-7OT Incident Response, Forensics, Recovery, and Continuity
NISTPF-8Protect-P Information Protection Processes (PR.PO-P)
Coverage crosswalk

A NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security to NIST Privacy Framework crosswalk, built to order

The table above lists candidate mappings. A crosswalk answers the narrower question you are probably here for: which NIST Privacy Framework controls your existing NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security work already satisfies, which are real gaps, and the reasoning behind every claim so you can check it. One pair, $299, one time.

NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security into NIST Privacy Framework
Not published yet

This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.

If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.

NIST Privacy Framework into NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security
Not published yet

This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.

If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.

NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security to NIST Privacy Framework (built to order)
$299
per framework pair, one time
  • Every evidenced control, with the reasoning behind it
  • Every gap, with what it requires
  • Its level of review stated plainly, not a bare number

Why this page shows two different percentages. The 75% in the header counts how many NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security controls carry at least one candidate mapping in the graph, before any review. The crosswalk percentage counts something stricter: how many NIST Privacy Framework controls are actually evidenced, after a pass that argued against each mapping and kept only what survived. They answer different questions and they are not meant to agree.

A crosswalk narrows the work. It does not replace an audit, and your assessor may take a different view on individual controls. Mappings between frameworks are judgements, not text printed in either standard, which is why every claim in the report shows its reasoning. Questions go to support@theartofservice.com.

Related Comparisons

Other NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security comparisons

Other NIST Privacy Framework comparisons

Stop Paying Consultants to Read Spreadsheets

AI-powered compliance intelligence across 686 frameworks, at a fraction of consulting costs.

$0/forever

Free

  • 686 framework browser
  • Cross-framework mappings (310K+)
  • 824 compliance assessments
  • 3 AI queries & searches per day
Get Started Free
Recommended
$149/month

Professional

  • Unlimited AI Compliance Advisory
  • Unlimited full-text search
  • Framework self-assessment
  • PDF, Excel & CSV exports
Start 7-Day Free Trial →

What are the key differences between NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security and NIST Privacy Framework?

NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security has 8 controls across its framework, while NIST Privacy Framework covers 8 controls. Direct mapping analysis identifies 6 overlapping controls (75% coverage). The frameworks diverge most significantly in OT Supply Chain, Lifecycle, Physical, where 1 NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security controls have no direct NIST Privacy Framework equivalent.

How many controls map between NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security and NIST Privacy Framework?

Of 8 total NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security controls, 6 map directly to NIST Privacy Framework controls, representing 75% coverage. The remaining 2 controls represent compliance gaps requiring additional documentation or compensating controls to satisfy both frameworks simultaneously.

What are the compliance gaps when mapping NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security to NIST Privacy Framework?

2 NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security controls have no direct equivalent in NIST Privacy Framework. The highest concentration of gaps is in OT Supply Chain, Lifecycle, Physical with 1 unmapped controls. These gaps represent areas where additional controls, policies, or documentation must be created to achieve compliance with both frameworks.

Which control domains have the most gaps between NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security and NIST Privacy Framework?

The domain with the highest gap count is OT Supply Chain, Lifecycle, Physical (1 gaps). Export the full domain-by-domain gap breakdown via the Professional tier to generate a prioritised remediation roadmap.

This platform provides educational compliance tools, not legal, regulatory, or professional compliance advice. Cross-framework mappings are AI-assisted interpretations and do not reproduce or replace official standards. Framework names and trademarks belong to their respective owners. Consult qualified professionals for your specific compliance requirements. See our Terms of Service.