ISO/IEC 27011:2024vsISO/IEC 17025:2017 - General Requirements for Testing and Calibration
See exactly how ISO/IEC 27011:2024 controls map to ISO/IEC 17025:2017 - General Requirements for Testing and Calibration. Pre-computed mappings, identified gaps, and coverage analysis.
Need this as a report you can hand to an assessor? A coverage crosswalk for this pair can be built to order.
According to the TheArtOfService Compliance Knowledge Graph:
ISO/IEC 27011:2024 maps to ISO/IEC 17025:2017 - General Requirements for Testing and Calibration with 7% coverage across 3 directly mapped controls. Analysis of 44 ISO/IEC 27011:2024 controls identifies 47 compliance gaps, primarily concentrated in Technological.
Source: TheArtOfService Knowledge Graph | 44 controls analysed | 686 frameworks | 309K+ cross-framework mappings
Control Mappings
Showing 6 of 6 mapped controls across 1 domains. Sign up to explore all 309K+ mappings across 686 frameworks.
Clause 1-4: Introduction and Framework(6 mappings)
A ISO/IEC 27011:2024 to ISO/IEC 17025:2017 - General Requirements for Testing and Calibration crosswalk, built to order
The table above lists candidate mappings. A crosswalk answers the narrower question you are probably here for: which ISO/IEC 17025:2017 - General Requirements for Testing and Calibration controls your existing ISO/IEC 27011:2024 work already satisfies, which are real gaps, and the reasoning behind every claim so you can check it. One pair, $299, one time.
This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.
If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.
This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.
If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.
- Every evidenced control, with the reasoning behind it
- Every gap, with what it requires
- Its level of review stated plainly, not a bare number
Why this page shows two different percentages. The 7% in the header counts how many ISO/IEC 27011:2024 controls carry at least one candidate mapping in the graph, before any review. The crosswalk percentage counts something stricter: how many ISO/IEC 17025:2017 - General Requirements for Testing and Calibration controls are actually evidenced, after a pass that argued against each mapping and kept only what survived. They answer different questions and they are not meant to agree.
A crosswalk narrows the work. It does not replace an audit, and your assessor may take a different view on individual controls. Mappings between frameworks are judgements, not text printed in either standard, which is why every claim in the report shows its reasoning. Questions go to support@theartofservice.com.
Related Comparisons
Other ISO/IEC 27011:2024 comparisons
Other ISO/IEC 17025:2017 - General Requirements for Testing and Calibration comparisons
Stop Paying Consultants to Read Spreadsheets
AI-powered compliance intelligence across 686 frameworks, at a fraction of consulting costs.
Free
- ✓ 686 framework browser
- ✓ Cross-framework mappings (309K+)
- ✓ 824 compliance assessments
- ✓ 3 AI queries & searches per day
Professional
- ✓ Unlimited AI Compliance Advisory
- ✓ Unlimited full-text search
- ✓ Framework self-assessment
- ✓ PDF, Excel & CSV exports
What are the key differences between ISO/IEC 27011:2024 and ISO/IEC 17025:2017 - General Requirements for Testing and Calibration?
ISO/IEC 27011:2024 has 44 controls across its framework, while ISO/IEC 17025:2017 - General Requirements for Testing and Calibration covers 74 controls. Direct mapping analysis identifies 3 overlapping controls (7% coverage). The frameworks diverge most significantly in Technological, where 11 ISO/IEC 27011:2024 controls have no direct ISO/IEC 17025:2017 - General Requirements for Testing and Calibration equivalent.
How many controls map between ISO/IEC 27011:2024 and ISO/IEC 17025:2017 - General Requirements for Testing and Calibration?
Of 44 total ISO/IEC 27011:2024 controls, 3 map directly to ISO/IEC 17025:2017 - General Requirements for Testing and Calibration controls, representing 7% coverage. The remaining 47 controls represent compliance gaps requiring additional documentation or compensating controls to satisfy both frameworks simultaneously.
What are the compliance gaps when mapping ISO/IEC 27011:2024 to ISO/IEC 17025:2017 - General Requirements for Testing and Calibration?
47 ISO/IEC 27011:2024 controls have no direct equivalent in ISO/IEC 17025:2017 - General Requirements for Testing and Calibration. The highest concentration of gaps is in Technological with 11 unmapped controls. These gaps represent areas where additional controls, policies, or documentation must be created to achieve compliance with both frameworks.
Which control domains have the most gaps between ISO/IEC 27011:2024 and ISO/IEC 17025:2017 - General Requirements for Testing and Calibration?
The domain with the highest gap count is Technological (11 gaps). Export the full domain-by-domain gap breakdown via the Professional tier to generate a prioritised remediation roadmap.
Related Resources
This platform provides educational compliance tools, not legal, regulatory, or professional compliance advice. Cross-framework mappings are AI-assisted interpretations and do not reproduce or replace official standards. Framework names and trademarks belong to their respective owners. Consult qualified professionals for your specific compliance requirements. See our Terms of Service.