Back to Frameworks

ISO 8536-4:2019

International
vISO 8536-4:2019 (sixth edition 2019-09)
12 domains
48 controls

The ISO product standard for gravity-fed infusion sets used once: material, physical, chemical and biological requirements with their limits and test methods, from particulate contamination, leakage and tensile strength to the drip chamber, flow rate and injection site, plus labelling, packaging and disposal.

Verified

ISO 8536-4:2019 is a compliance framework from International with 12 domains and 48 controls. The largest domains are Clause 7: Physical requirements – ISO 8536-4:2019 (13 controls), Annex A (normative): Physical tests – ISO 8536-4:2019 (7 controls), Annex B (normative): Chemical tests – ISO 8536-4:2019 (6 controls). Every control below carries what it requires and what an assessor expects to see.

Maintained by Gerard Blokdyk

Framework summaries on this platform are interpretations grounded in the published source, for educational and compliance planning purposes. They do not reproduce or replace the official standards. Refer to the authoritative source for the definitive text. Framework names and trademarks belong to their respective organisations.

Framework Domains (12)

Annex A (normative): Physical tests – ISO 8536-4:2019

7 controls
Controls in the Annex A (normative): Physical tests – ISO 8536-4:2019 domain of ISO 8536-4:2019: 7 controls
CodeTitle
iso-8536-4-2019::A.1Physical test ambient temperature
iso-8536-4-2019::A.2Particles in infusion sets
iso-8536-4-2019::A.3Leak testing with positive and negative pressure
iso-8536-4-2019::A.4Infusion set tensile strength
iso-8536-4-2019::A.5Flow rate across three air-inlet setups
iso-8536-4-2019::A.6Fluid filter retention efficiency
iso-8536-4-2019::A.7Injection site leakage test

Annex B (normative): Chemical tests – ISO 8536-4:2019

6 controls
Controls in the Annex B (normative): Chemical tests – ISO 8536-4:2019 domain of ISO 8536-4:2019: 6 controls
CodeTitle
iso-8536-4-2019::B.1Making the extract and the blank
iso-8536-4-2019::B.2Titration of reducing matter
iso-8536-4-2019::B.3Metal ion colouration test
iso-8536-4-2019::B.4Titration acidity or alkalinity
iso-8536-4-2019::B.5Gravimetric non-volatile residue
iso-8536-4-2019::B.6Ultraviolet absorption spectrum

Annex C (normative): Biological tests – ISO 8536-4:2019

2 controls
Controls in the Annex C (normative): Biological tests – ISO 8536-4:2019 domain of ISO 8536-4:2019: 2 controls
CodeTitle
iso-8536-4-2019::C.1Pyrogenicity test method
iso-8536-4-2019::C.2Biological evaluation guidance

Clause 10: Labelling – ISO 8536-4:2019

3 controls
Controls in the Clause 10: Labelling – ISO 8536-4:2019 domain of ISO 8536-4:2019: 3 controls
CodeTitle
iso-8536-4-2019::10.1General labelling requirements
iso-8536-4-2019::10.2Unit container label content
iso-8536-4-2019::10.3Shelf or multi unit container label content

Clause 11: Packaging – ISO 8536-4:2019

2 controls
Controls in the Clause 11: Packaging – ISO 8536-4:2019 domain of ISO 8536-4:2019: 2 controls
CodeTitle
iso-8536-4-2019::11.1Individual sterile packing and tamper evidence
iso-8536-4-2019::11.2Packing free of kinks and flattening

Clause 12: Disposal – ISO 8536-4:2019

1 controls
Controls in the Clause 12: Disposal – ISO 8536-4:2019 domain of ISO 8536-4:2019: 1 controls
CodeTitle
iso-8536-4-2019::12Disposal information for users

Clause 4: General requirements – ISO 8536-4:2019

2 controls
Controls in the Clause 4: General requirements – ISO 8536-4:2019 domain of ISO 8536-4:2019: 2 controls
CodeTitle
iso-8536-4-2019::4.1Set configuration and container compatibility
iso-8536-4-2019::4.2Protective caps on set and air inlet

Clause 5: Designation – ISO 8536-4:2019

1 controls
Controls in the Clause 5: Designation – ISO 8536-4:2019 domain of ISO 8536-4:2019: 1 controls
CodeTitle
iso-8536-4-2019::5Designation follows labelling

Clause 6: Materials – ISO 8536-4:2019

1 controls
Controls in the Clause 6: Materials – ISO 8536-4:2019 domain of ISO 8536-4:2019: 1 controls
CodeTitle
iso-8536-4-2019::6Material compliance across clauses

Clause 7: Physical requirements – ISO 8536-4:2019

13 controls
Controls in the Clause 7: Physical requirements – ISO 8536-4:2019 domain of ISO 8536-4:2019: 13 controls
CodeTitle
iso-8536-4-2019::7.1Particulate contamination control
iso-8536-4-2019::7.10Delivery flow rate
iso-8536-4-2019::7.11Injection site reseal and position
iso-8536-4-2019::7.12Male conical fitting
iso-8536-4-2019::7.13Protective cap function
iso-8536-4-2019::7.2Leakage of the infusion set
iso-8536-4-2019::7.3Tensile strength of the set
iso-8536-4-2019::7.4Closure piercing device dimensions and function
iso-8536-4-2019::7.5Air inlet unit and filter function
iso-8536-4-2019::7.6Tubing clarity and length
iso-8536-4-2019::7.7Fluid filter retention
iso-8536-4-2019::7.8Drip chamber and drip tube dimensions
iso-8536-4-2019::7.9Flow regulator conformity

Clause 8: Chemical requirements – ISO 8536-4:2019

5 controls
Controls in the Clause 8: Chemical requirements – ISO 8536-4:2019 domain of ISO 8536-4:2019: 5 controls
CodeTitle
iso-8536-4-2019::8.1Oxidizable matter reduction
iso-8536-4-2019::8.2Metal ions in the extract
iso-8536-4-2019::8.3Titration acidity or alkalinity
iso-8536-4-2019::8.4Residue on evaporation
iso-8536-4-2019::8.5UV absorption of extract

Clause 9: Biological requirements – ISO 8536-4:2019

5 controls
Controls in the Clause 9: Biological requirements – ISO 8536-4:2019 domain of ISO 8536-4:2019: 5 controls
CodeTitle
iso-8536-4-2019::9.1Biological compatibility assessment
iso-8536-4-2019::9.2Validated sterilisation process
iso-8536-4-2019::9.3Freedom from pyrogens
iso-8536-4-2019::9.4Assessment for haemolysis
iso-8536-4-2019::9.5Assessment of toxicity

What is ISO 8536-4:2019 and who does it apply to?

ISO 8536-4:2019 is a compliance framework from International with 12 domains and 48 controls. The ISO product standard for gravity-fed infusion sets used once: material, physical, chemical and biological requirements with their limits and test methods, from particulate contamination, leakage and tensile strength to the drip chamber, flow rate and injection site, plus labelling, packaging and disposal. It is used by organisations to establish and maintain compliance with industry standards and regulatory requirements.

What does ISO 8536-4:2019 actually require?

ISO 8536-4:2019 has 48 controls organised across 12 domains. The largest domains are Clause 7: Physical requirements – ISO 8536-4:2019 (13 controls), Annex A (normative): Physical tests – ISO 8536-4:2019 (7 controls), Annex B (normative): Chemical tests – ISO 8536-4:2019 (6 controls). Each control defines specific requirements that organisations must implement to achieve compliance.

If I already comply with another framework, how much of ISO 8536-4:2019 do I already cover?

ISO 8536-4:2019 does not currently have cross-framework mappings in our system. Check back as we continuously expand our mapping database.

How do I implement ISO 8536-4:2019?

Start your ISO 8536-4:2019 compliance journey by running a self-assessment on our platform to identify your current compliance posture. Our AI advisory can answer specific questions about ISO 8536-4:2019 requirements, and cross-framework mapping helps you leverage existing controls from other frameworks you may already comply with. Create a free account to access all 48 controls and track your progress.

Start Your Compliance Journey

Create a free account to run self-assessments, get AI advisory, and track your compliance progress across 1,381 frameworks.

Get Started Free →

Free forever, no credit card required