TheArtOfService
Cross-Framework Mapping

NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) SecurityvsAnnex 11 to EU GMP - Computerised Systems

See exactly how NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security controls map to Annex 11 to EU GMP - Computerised Systems. Pre-computed mappings, identified gaps, and coverage analysis.

14
Controls Mapped
0
Gaps Found
75%
Coverage

According to the TheArtOfService Compliance Knowledge Graph:

NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security maps to Annex 11 to EU GMP - Computerised Systems with 75% coverage across 6 directly mapped controls. Analysis of 8 NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security controls identifies 2 compliance gaps — primarily concentrated in OT Supply Chain, Lifecycle, Physical.

Source: TheArtOfService Knowledge Graph | 8 controls analysed | 706 frameworks | 324K+ cross-framework mappings

Control Mappings

Showing 14 of 14 mapped controls across 6 domains. Sign up to explore all 324K+ mappings across 706 frameworks.

OT Security Program Governance(4 mappings)

NISTSP82-1OT Security Program Governance, Policy, Roles, and Safety-Security Integration4 targets
→Clause 1Risk management
→Clause 10Change and configuration management
→Clause 2Personnel
→Clause 3Suppliers and service providers

OT Risk Assessment(2 mappings)

NISTSP82-2OT Risk Assessment and Threat/Vulnerability Identification2 targets
→Clause 1Risk management
→Clause 3Suppliers and service providers

OT Access Control and IAM(1 mappings)

NISTSP82-4OT Access Control, Identity, Authentication, and Remote Access
→Clause 12Security

OT Config, Patch, Vulnerability, Malware(1 mappings)

NISTSP82-5OT Configuration Management, Patching, Vulnerability Management, and Malware Protection
→Clause 10Change and configuration management

OT Audit, Monitoring, Anomaly Detection(2 mappings)

NISTSP82-6OT Audit, Monitoring, Anomaly Detection, and OT-Specific SOC2 targets
→Clause 10Change and configuration management
→Clause 9Audit trails

OT Incident Response and Recovery(4 mappings)

NISTSP82-7OT Incident Response, Forensics, Recovery, and Continuity4 targets
→Clause 10Change and configuration management
→Clause 13Incident management
→Clause 2Personnel
→Clause 3Suppliers and service providers

Related Comparisons

Other NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security comparisons

NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security vs API 11648 mappingsNIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security vs OWASP Top 10:20256 mappingsNIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security vs OWASP MASVS6 mappingsNIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security vs OWASP DevSecOps Maturity Model (DSOMM)6 mappingsNIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security vs OWASP ASVS6 mappingsNIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security vs NIST Cybersecurity Framework 2.06 mappingsNIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security vs ISO 27001:20226 mappingsNIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security vs ISO 270186 mappings

Other Annex 11 to EU GMP - Computerised Systems comparisons

FDA 21 CFR Part 11 vs Annex 11 to EU GMP - Computerised Systems13 mappingsNIST SP 800-53 Rev 5 vs Annex 11 to EU GMP - Computerised Systems9 mappingsGAMP 5 - Good Automated Manufacturing Practice vs Annex 11 to EU GMP - Computerised Systems7 mappingsFTC GLBA Safeguards Rule (16 CFR Part 314) vs Annex 11 to EU GMP - Computerised Systems7 mappingsFedRAMP Rev 5 vs Annex 11 to EU GMP - Computerised Systems7 mappingsNIST SP 800-171A Rev 3 - Assessing CUI Security Requirements vs Annex 11 to EU GMP - Computerised Systems7 mappingsISO 28001:2007 Supply Chain Security Management vs Annex 11 to EU GMP - Computerised Systems7 mappingsProtective Security Policy Framework (PSPF) Release 2024 vs Annex 11 to EU GMP - Computerised Systems6 mappings

Stop Paying Consultants to Read Spreadsheets

AI-powered compliance intelligence across 706 frameworks — at a fraction of consulting costs.

$0/forever

Free

  • ✓ 706 framework browser
  • ✓ Cross-framework mappings (324K+)
  • ✓ 824 compliance assessments
  • ✓ 3 AI queries & searches per day
Get Started Free
Recommended
$49/month

Professional

  • ✓ Unlimited AI Compliance Advisory
  • ✓ Unlimited full-text search
  • ✓ Framework self-assessment
  • ✓ PDF, Excel & CSV exports
Start 7-Day Free Trial →

Popular framework comparisons

NIST CSF vs NIST 800-53ISO 27001 vs NIST CSFCMMC vs NIST 800-53FedRAMP vs NIST 800-53NIST CSF vs SOC 2HIPAA vs NIST 800-53ISO 27001 vs SOC 2ISO 27001 vs ISO 27701

What are the key differences between NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security and Annex 11 to EU GMP - Computerised Systems?

NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security has 8 controls across its framework, while Annex 11 to EU GMP - Computerised Systems covers 17 controls. Direct mapping analysis identifies 6 overlapping controls (75% coverage). The frameworks diverge most significantly in OT Supply Chain, Lifecycle, Physical, where 1 NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security controls have no direct Annex 11 to EU GMP - Computerised Systems equivalent.

How many controls map between NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security and Annex 11 to EU GMP - Computerised Systems?

Of 8 total NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security controls, 6 map directly to Annex 11 to EU GMP - Computerised Systems controls — representing 75% coverage. The remaining 2 controls represent compliance gaps requiring additional documentation or compensating controls to satisfy both frameworks simultaneously.

What are the compliance gaps when mapping NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security to Annex 11 to EU GMP - Computerised Systems?

2 NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security controls have no direct equivalent in Annex 11 to EU GMP - Computerised Systems. The highest concentration of gaps is in OT Supply Chain, Lifecycle, Physical with 1 unmapped controls. These gaps represent areas where additional controls, policies, or documentation must be created to achieve compliance with both frameworks.

Which control domains have the most gaps between NIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security and Annex 11 to EU GMP - Computerised Systems?

The domain with the highest gap count is OT Supply Chain, Lifecycle, Physical (1 gaps). Export the full domain-by-domain gap breakdown via the Professional tier to generate a prioritised remediation roadmap.

Related Resources

How to Map Controls Across Frameworks|Multi-Framework Compliance Guide|Compliance Glossary

This platform provides educational compliance tools, not legal, regulatory, or professional compliance advice. Cross-framework mappings are AI-assisted interpretations and do not reproduce or replace official standards. Framework names and trademarks belong to their respective owners. Consult qualified professionals for your specific compliance requirements. See our Terms of Service.