TheArtOfService
Cross-Framework Mapping

ISO 55001:2024vsISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)

See exactly how ISO 55001:2024 controls map to ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM). Pre-computed mappings, identified gaps, and coverage analysis.

7
Controls Mapped
31
Gaps Found
18%
Coverage

Need this as a report you can hand to an assessor? A coverage crosswalk for this pair can be built to order.

According to the TheArtOfService Compliance Knowledge Graph:

ISO 55001:2024 maps to ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM) with 18% coverage across 7 directly mapped controls. Analysis of 38 ISO 55001:2024 controls identifies 31 compliance gaps, primarily concentrated in Support – ISO 55001:2024.

Source: TheArtOfService Knowledge Graph | 38 controls analysed | 1,121 frameworks | 315K+ cross-framework mappings

Control Mappings

Showing 20 of 22 control mappings across 5 domains. Sign up to explore all 315K+ mappings across 1,121 frameworks.

Improvement – ISO 55001:2024(1 mappings)

iso-55001-2024::10.3Predictive action
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::3:5.1.55.1.5 Identify the foreseeable trigger events for which information shall be managed

Context of the organization – ISO 55001:2024(1 mappings)

iso-55001-2024::4.3Determining the scope of the asset management system
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::3:5.1.35.1.3 Identify the assets for which information shall be managed

Leadership – ISO 55001:2024(3 mappings)

iso-55001-2024::5.3Roles, responsibilities and authorities3 targets
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::1:7.27.2 Asset information management functions
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::3:5.1.15.1.1 Appoint individuals to undertake the information management function
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::3:5.3.15.3.1 Nominate individuals to undertake the information management function

Support – ISO 55001:2024(15 mappings)

iso-55001-2024::7.1Resources
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::3:5.5.45.5.4 Maintain resources in readiness for a trigger event
iso-55001-2024::7.6Data and information14 targets
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::1:4.14.1 Principles of asset and project information
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::1:5.15.1 Principles of information requirements
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::1:5.25.2 Organizational information requirements (OIR)
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::1:5.35.3 Asset information requirements (AIR)
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::1:5.45.4 Project information requirements (PIR)
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::1:5.65.6 Asset information model (AIM)
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::2:5.1.25.1.2 Establish the project's information requirements
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::3:5.1.105.1.10 Establish links to enterprise systems
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::3:5.1.115.1.11 Establish the asset information model
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::3:5.1.125.1.12 Establish processes to maintain the AIM
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::3:5.1.25.1.2 Establish organizational information requirements
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::3:5.1.45.1.4 Establish the asset information requirements
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::3:5.8.15.8.1 Aggregate an accepted information model into the AIM
→iso-19650-organisation-and-digitisation-of-information-about-buildings-and-civil-engineering-works-bim::3:5.8.25.8.2 Review and continue maintenance of the AIM

+2 more mappings

Plus AI-powered gap analysis, compliance advisory, PDF exports, and cross-mapping for all 1,121 frameworks.

Create Free Account →

Free forever, no credit card required

Coverage crosswalk

A ISO 55001:2024 to ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM) crosswalk, built to order

The table above lists candidate mappings. A crosswalk answers the narrower question you are probably here for: which ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM) controls your existing ISO 55001:2024 work already satisfies, which are real gaps, and the reasoning behind every claim so you can check it. One pair, $299, one time.

ISO 55001:2024 into ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)
Not published yet

This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.

If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.

ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM) into ISO 55001:2024
Not published yet

This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.

If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.

ISO 55001:2024 to ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM) (built to order)
$299
per framework pair, one time
  • Every evidenced control, with the reasoning behind it
  • Every gap, with what it requires
  • Its level of review stated plainly, not a bare number

Why this page shows two different percentages. The 18% in the header counts how many ISO 55001:2024 controls carry at least one candidate mapping in the graph, before any review. The crosswalk percentage counts something stricter: how many ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM) controls are actually evidenced, after a pass that argued against each mapping and kept only what survived. They answer different questions and they are not meant to agree.

A crosswalk narrows the work. It does not replace an audit, and your assessor may take a different view on individual controls. Mappings between frameworks are judgements, not text printed in either standard, which is why every claim in the report shows its reasoning. Questions go to support@theartofservice.com.

Related Comparisons

Other ISO 55001:2024 comparisons

ISO 55001:2024 vs ISO 55001:201438 mappings

Other ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM) comparisons

ISO 9001:2015 vs ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)70 mappingsISO 27002:2022 vs ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)21 mappingsISO 15489-1:2016 vs ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)20 mappingsISO 10007:2017 vs ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)13 mappingsUK Construction (Design and Management) Regulations 2015 (CDM 2015) vs ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)10 mappingsISO 45001:2018 vs ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)7 mappingsOpenSSF Scorecard vs ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)5 mappingsSLSA vs ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)5 mappings

Stop Paying Consultants to Read Spreadsheets

Cross-framework mappings across 1,121 frameworks, at a fraction of consulting costs.

$0/forever

Free

  • ✓ 1,121 framework browser
  • ✓ Cross-framework mappings (315K+)
  • ✓ 824 compliance assessments
  • ✓ 3 AI queries & searches per day
Get Started Free
Recommended
$149/month

Professional

  • ✓ Unlimited AI Compliance Advisory
  • ✓ Unlimited full-text search
  • ✓ Framework self-assessment
  • ✓ PDF, Excel & CSV exports
Start 7-Day Free Trial →

Popular framework comparisons

NIST CSF vs NIST 800-53ISO 27001 vs NIST CSFCMMC vs NIST 800-53FedRAMP vs NIST 800-53NIST CSF vs SOC 2HIPAA vs NIST 800-53ISO 27001 vs SOC 2ISO 27001 vs ISO 27701

What are the key differences between ISO 55001:2024 and ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)?

ISO 55001:2024 has 38 controls across its framework, while ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM) covers 242 controls. Direct mapping analysis identifies 7 overlapping controls (18% coverage). The frameworks diverge most significantly in Support – ISO 55001:2024, where 7 ISO 55001:2024 controls have no direct ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM) equivalent.

How many controls map between ISO 55001:2024 and ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)?

Of 38 total ISO 55001:2024 controls, 7 map directly to ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM) controls, representing 18% coverage. The remaining 31 controls represent compliance gaps requiring additional documentation or compensating controls to satisfy both frameworks simultaneously.

What are the compliance gaps when mapping ISO 55001:2024 to ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)?

31 ISO 55001:2024 controls have no direct equivalent in ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM). The highest concentration of gaps is in Support – ISO 55001:2024 with 7 unmapped controls. These gaps represent areas where additional controls, policies, or documentation must be created to achieve compliance with both frameworks.

Which control domains have the most gaps between ISO 55001:2024 and ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM)?

The domain with the highest gap count is Support – ISO 55001:2024 (7 gaps). Export the full domain-by-domain gap breakdown via the Professional tier to generate a prioritised remediation roadmap.

Related Resources

How to Map Controls Across Frameworks|Multi-Framework Compliance Guide|Compliance Glossary

This platform provides educational compliance tools, not legal, regulatory, or professional compliance advice. Cross-framework mappings are judged interpretations, grounded in the source text of both frameworks, and do not reproduce or replace official standards. Framework names and trademarks belong to their respective owners. Consult qualified professionals for your specific compliance requirements. See our Terms of Service.