TheArtOfService
Cross-Framework Mapping

IATF 16949:2016 - Quality Management System for Automotive ProductionvsAnnex 11 to EU GMP - Computerised Systems

See exactly how IATF 16949:2016 - Quality Management System for Automotive Production controls map to Annex 11 to EU GMP - Computerised Systems. Pre-computed mappings, identified gaps, and coverage analysis.

9
Controls Mapped
1
Gaps Found
50%
Coverage

According to the TheArtOfService Compliance Knowledge Graph:

IATF 16949:2016 - Quality Management System for Automotive Production maps to Annex 11 to EU GMP - Computerised Systems with 50% coverage across 5 directly mapped controls. Analysis of 10 IATF 16949:2016 - Quality Management System for Automotive Production controls identifies 5 compliance gaps — primarily concentrated in IATF 16949 Clause 8 - Nonconforming + PPAP.

Source: TheArtOfService Knowledge Graph | 10 controls analysed | 718 frameworks | 332K+ cross-framework mappings

Control Mappings

Showing 9 of 9 mapped controls across 5 domains. Sign up to explore all 332K+ mappings across 718 frameworks.

IATF 16949 Clause 10 - Improvement(3 mappings)

IATF16949-Clause10-Improvement-Nonconformity-CorrectiveAction-Problem-ErrorProofIATF 16949 Clause 10 - Improvement + Nonconformity + Corrective Action + Problem Solving + Error Proofing + Continual Improvement3 targets
→Clause 10Change and configuration management
→Clause 2Personnel
→Clause 3Suppliers and service providers

IATF 16949 Clause 6 - Planning(1 mappings)

IATF16949-Clause6-Planning-Risk-Contingency-Objectives-ChangeIATF 16949 Clause 6 - Planning + Risks and Opportunities + Contingency Plans + Quality Objectives + Change
→Clause 1Risk management

IATF 16949 Clause 8 - Operation (APQP + Design + Production)(1 mappings)

IATF16949-Clause8-Operation-APQP-Design-Production-ControlPlan-SpecialCharsIATF 16949 Clause 8 - Operation Planning + APQP + Design + Special Characteristics + Production + Control Plan + Set-Up Verification
→Clause 1Risk management

IATF 16949 Clause 8 - Supplier(1 mappings)

IATF16949-Clause8-Supplier-QMS-Development-Externally-ProvidedIATF 16949 Clause 8 Supplier - Control of Externally Provided Processes + Type and Extent + Supplier QMS Development
→Clause 3Suppliers and service providers

IATF 16949 Clause 9 - Performance Evaluation(3 mappings)

IATF16949-Clause9-Performance-Monitoring-InternalAudit-ManagementReviewIATF 16949 Clause 9 - Performance Evaluation + Monitoring + Internal Audit + Manufacturing Process Audit + Management Review3 targets
→Clause 10Change and configuration management
→Clause 2Personnel
→Clause 3Suppliers and service providers

Related Comparisons

Other IATF 16949:2016 - Quality Management System for Automotive Production comparisons

IATF 16949:2016 - Quality Management System for Automotive Production vs USMCA Chapter 19 - Digital Trade (United States-Mexico-Canada Agreement)6 mappingsIATF 16949:2016 - Quality Management System for Automotive Production vs NIST SP 800-171A Rev 3 - Assessing CUI Security Requirements6 mappingsIATF 16949:2016 - Quality Management System for Automotive Production vs AS9100D:2016 - Quality Management Systems for Aviation, Space, and Defence6 mappingsIATF 16949:2016 - Quality Management System for Automotive Production vs AS9100D - Aerospace Quality Management System5 mappingsIATF 16949:2016 - Quality Management System for Automotive Production vs ISO/IEC 27003:20175 mappingsIATF 16949:2016 - Quality Management System for Automotive Production vs ISO/IEC 27014:20205 mappingsIATF 16949:2016 - Quality Management System for Automotive Production vs German Supply Chain Due Diligence Act (LkSG)5 mappingsIATF 16949:2016 - Quality Management System for Automotive Production vs ISO 134855 mappings

Other Annex 11 to EU GMP - Computerised Systems comparisons

FDA 21 CFR Part 11 vs Annex 11 to EU GMP - Computerised Systems13 mappingsNIST SP 800-53 Rev 5 vs Annex 11 to EU GMP - Computerised Systems9 mappingsNIST SP 800-82 Revision 3: Guide to Industrial Control Systems (ICS) Security vs Annex 11 to EU GMP - Computerised Systems7 mappingsGAMP 5 - Good Automated Manufacturing Practice vs Annex 11 to EU GMP - Computerised Systems7 mappingsFTC GLBA Safeguards Rule (16 CFR Part 314) vs Annex 11 to EU GMP - Computerised Systems7 mappingsFedRAMP Rev 5 vs Annex 11 to EU GMP - Computerised Systems7 mappingsNIST SP 800-171A Rev 3 - Assessing CUI Security Requirements vs Annex 11 to EU GMP - Computerised Systems7 mappingsISO 28001:2007 Supply Chain Security Management vs Annex 11 to EU GMP - Computerised Systems7 mappings

Stop Paying Consultants to Read Spreadsheets

AI-powered compliance intelligence across 718 frameworks — at a fraction of consulting costs.

$0/forever

Free

  • ✓ 718 framework browser
  • ✓ Cross-framework mappings (332K+)
  • ✓ 824 compliance assessments
  • ✓ 3 AI queries & searches per day
Get Started Free
Recommended
$49/month

Professional

  • ✓ Unlimited AI Compliance Advisory
  • ✓ Unlimited full-text search
  • ✓ Framework self-assessment
  • ✓ PDF, Excel & CSV exports
Start 7-Day Free Trial →

Popular framework comparisons

NIST CSF vs NIST 800-53ISO 27001 vs NIST CSFCMMC vs NIST 800-53FedRAMP vs NIST 800-53NIST CSF vs SOC 2HIPAA vs NIST 800-53ISO 27001 vs SOC 2ISO 27001 vs ISO 27701

What are the key differences between IATF 16949:2016 - Quality Management System for Automotive Production and Annex 11 to EU GMP - Computerised Systems?

IATF 16949:2016 - Quality Management System for Automotive Production has 10 controls across its framework, while Annex 11 to EU GMP - Computerised Systems covers 17 controls. Direct mapping analysis identifies 5 overlapping controls (50% coverage). The frameworks diverge most significantly in IATF 16949 Clause 8 - Nonconforming + PPAP, where 1 IATF 16949:2016 - Quality Management System for Automotive Production controls have no direct Annex 11 to EU GMP - Computerised Systems equivalent.

How many controls map between IATF 16949:2016 - Quality Management System for Automotive Production and Annex 11 to EU GMP - Computerised Systems?

Of 10 total IATF 16949:2016 - Quality Management System for Automotive Production controls, 5 map directly to Annex 11 to EU GMP - Computerised Systems controls — representing 50% coverage. The remaining 5 controls represent compliance gaps requiring additional documentation or compensating controls to satisfy both frameworks simultaneously.

What are the compliance gaps when mapping IATF 16949:2016 - Quality Management System for Automotive Production to Annex 11 to EU GMP - Computerised Systems?

5 IATF 16949:2016 - Quality Management System for Automotive Production controls have no direct equivalent in Annex 11 to EU GMP - Computerised Systems. The highest concentration of gaps is in IATF 16949 Clause 8 - Nonconforming + PPAP with 1 unmapped controls. These gaps represent areas where additional controls, policies, or documentation must be created to achieve compliance with both frameworks.

Which control domains have the most gaps between IATF 16949:2016 - Quality Management System for Automotive Production and Annex 11 to EU GMP - Computerised Systems?

The domain with the highest gap count is IATF 16949 Clause 8 - Nonconforming + PPAP (1 gaps). Export the full domain-by-domain gap breakdown via the Professional tier to generate a prioritised remediation roadmap.

Related Resources

How to Map Controls Across Frameworks|Multi-Framework Compliance Guide|Compliance Glossary

This platform provides educational compliance tools, not legal, regulatory, or professional compliance advice. Cross-framework mappings are AI-assisted interpretations and do not reproduce or replace official standards. Framework names and trademarks belong to their respective owners. Consult qualified professionals for your specific compliance requirements. See our Terms of Service.