Cross-Framework Mapping

Protective Security Policy Framework (PSPF) Release 2026vsANSI/ASIS PAP.1-2012 Physical Asset Protection

See exactly how Protective Security Policy Framework (PSPF) Release 2026 controls map to ANSI/ASIS PAP.1-2012 Physical Asset Protection. Pre-computed mappings, identified gaps, and coverage analysis.

9
Controls Mapped
239
Gaps Found
4%
Coverage

Need this as a report you can hand to an assessor? A coverage crosswalk for this pair can be built to order.

According to the TheArtOfService Compliance Knowledge Graph:

Protective Security Policy Framework (PSPF) Release 2026 maps to ANSI/ASIS PAP.1-2012 Physical Asset Protection with 4% coverage across 9 directly mapped controls. Analysis of 248 Protective Security Policy Framework (PSPF) Release 2026 controls identifies 245 compliance gaps, primarily concentrated in Part Five: Personnel (sections 16 to 22) – Protective Security Policy Framework (PSPF) Release 2026.

Source: TheArtOfService Knowledge Graph | 248 controls analysed | 868 frameworks | 315K+ cross-framework mappings

Control Mappings

Showing 9 of 9 mapped controls across 2 domains. Sign up to explore all 315K+ mappings across 868 frameworks.

Part Two: Risk (sections 5 to 8) – Protective Security Policy Framework (PSPF) Release 2026(1 mappings)

protective-security-policy-framework-pspf-release-2026::00560056 Emergency plans integrated in business continuity
→ansi-asis-pap-1-2012-physical-asset-protection::A.7.6A.7.6 Emergencies, unusual situations and disruptive events

Part Six: Physical (sections 23 to 25) – Protective Security Policy Framework (PSPF) Release 2026(8 mappings)

protective-security-policy-framework-pspf-release-2026::01890189 Integrate protective security in facility planning, selection, design and modification
→ansi-asis-pap-1-2012-physical-asset-protection::A.7.4A.7.4 A PDCA-based physical protection systems life-cycle programme
protective-security-policy-framework-pspf-release-2026::01900190 Facility security plan for new, under-construction or refurbished facilities
→ansi-asis-pap-1-2012-physical-asset-protection::A.7.3A.7.3 Design of controls and countermeasures (PPS design)
protective-security-policy-framework-pspf-release-2026::01910191 Site selection informed by the site selection factors
→ansi-asis-pap-1-2012-physical-asset-protection::B.1.5B.1.5 Crime prevention through environmental design (CPTED)
protective-security-policy-framework-pspf-release-2026::01930193 Construct facilities to ASIO Technical Notes for public and non-classified areas
→ansi-asis-pap-1-2012-physical-asset-protection::B.1.6.2B.1.6.2 Implementing site hardening systems
protective-security-policy-framework-pspf-release-2026::01950195 Operate and maintain facilities per Security Zones and measures
→ansi-asis-pap-1-2012-physical-asset-protection::A.7.5A.7.5 PPS maintenance, evaluation and replacement
protective-security-policy-framework-pspf-release-2026::02000200 Physical measures against loss of availability and unauthorised access or removal
→ansi-asis-pap-1-2012-physical-asset-protection::B.1B.1 PAP system goals: protection in depth, tolerance of component failure, balanced protection and performance specifications
protective-security-policy-framework-pspf-release-2026::02010201 Physical measures commensurate with business impact level
→ansi-asis-pap-1-2012-physical-asset-protection::B.1.1B.1.1 PAP systems applied through the A.4.2 risk assessment
protective-security-policy-framework-pspf-release-2026::02090209 Security guard arrangements per Table 47
→ansi-asis-pap-1-2012-physical-asset-protection::B.8B.8 Personnel: involving people and choosing a security staffing model
Coverage crosswalk

A Protective Security Policy Framework (PSPF) Release 2026 to ANSI/ASIS PAP.1-2012 Physical Asset Protection crosswalk, built to order

The table above lists candidate mappings. A crosswalk answers the narrower question you are probably here for: which ANSI/ASIS PAP.1-2012 Physical Asset Protection controls your existing Protective Security Policy Framework (PSPF) Release 2026 work already satisfies, which are real gaps, and the reasoning behind every claim so you can check it. One pair, $299, one time.

Protective Security Policy Framework (PSPF) Release 2026 into ANSI/ASIS PAP.1-2012 Physical Asset Protection
Not published yet

This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.

If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.

ANSI/ASIS PAP.1-2012 Physical Asset Protection into Protective Security Policy Framework (PSPF) Release 2026
Not published yet

This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.

If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.

Protective Security Policy Framework (PSPF) Release 2026 to ANSI/ASIS PAP.1-2012 Physical Asset Protection (built to order)
$299
per framework pair, one time
  • Every evidenced control, with the reasoning behind it
  • Every gap, with what it requires
  • Its level of review stated plainly, not a bare number

Why this page shows two different percentages. The 4% in the header counts how many Protective Security Policy Framework (PSPF) Release 2026 controls carry at least one candidate mapping in the graph, before any review. The crosswalk percentage counts something stricter: how many ANSI/ASIS PAP.1-2012 Physical Asset Protection controls are actually evidenced, after a pass that argued against each mapping and kept only what survived. They answer different questions and they are not meant to agree.

A crosswalk narrows the work. It does not replace an audit, and your assessor may take a different view on individual controls. Mappings between frameworks are judgements, not text printed in either standard, which is why every claim in the report shows its reasoning. Questions go to support@theartofservice.com.

Stop Paying Consultants to Read Spreadsheets

Cross-framework mappings across 868 frameworks, at a fraction of consulting costs.

$0/forever

Free

  • ✓ 868 framework browser
  • ✓ Cross-framework mappings (315K+)
  • ✓ 824 compliance assessments
  • ✓ 3 AI queries & searches per day
Get Started Free
Recommended
$149/month

Professional

  • ✓ Unlimited AI Compliance Advisory
  • ✓ Unlimited full-text search
  • ✓ Framework self-assessment
  • ✓ PDF, Excel & CSV exports
Start 7-Day Free Trial →

What are the key differences between Protective Security Policy Framework (PSPF) Release 2026 and ANSI/ASIS PAP.1-2012 Physical Asset Protection?

Protective Security Policy Framework (PSPF) Release 2026 has 248 controls across its framework, while ANSI/ASIS PAP.1-2012 Physical Asset Protection covers 74 controls. Direct mapping analysis identifies 9 overlapping controls (4% coverage). The frameworks diverge most significantly in Part Five: Personnel (sections 16 to 22) – Protective Security Policy Framework (PSPF) Release 2026, where 74 Protective Security Policy Framework (PSPF) Release 2026 controls have no direct ANSI/ASIS PAP.1-2012 Physical Asset Protection equivalent.

How many controls map between Protective Security Policy Framework (PSPF) Release 2026 and ANSI/ASIS PAP.1-2012 Physical Asset Protection?

Of 248 total Protective Security Policy Framework (PSPF) Release 2026 controls, 9 map directly to ANSI/ASIS PAP.1-2012 Physical Asset Protection controls, representing 4% coverage. The remaining 245 controls represent compliance gaps requiring additional documentation or compensating controls to satisfy both frameworks simultaneously.

What are the compliance gaps when mapping Protective Security Policy Framework (PSPF) Release 2026 to ANSI/ASIS PAP.1-2012 Physical Asset Protection?

245 Protective Security Policy Framework (PSPF) Release 2026 controls have no direct equivalent in ANSI/ASIS PAP.1-2012 Physical Asset Protection. The highest concentration of gaps is in Part Five: Personnel (sections 16 to 22) – Protective Security Policy Framework (PSPF) Release 2026 with 74 unmapped controls. These gaps represent areas where additional controls, policies, or documentation must be created to achieve compliance with both frameworks.

Which control domains have the most gaps between Protective Security Policy Framework (PSPF) Release 2026 and ANSI/ASIS PAP.1-2012 Physical Asset Protection?

The domain with the highest gap count is Part Five: Personnel (sections 16 to 22) – Protective Security Policy Framework (PSPF) Release 2026 (74 gaps). Export the full domain-by-domain gap breakdown via the Professional tier to generate a prioritised remediation roadmap.

This platform provides educational compliance tools, not legal, regulatory, or professional compliance advice. Cross-framework mappings are AI-assisted interpretations and do not reproduce or replace official standards. Framework names and trademarks belong to their respective owners. Consult qualified professionals for your specific compliance requirements. See our Terms of Service.