IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1)vsISO/IEC 17025:2017 - General Requirements for Testing and Calibration
See exactly how IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) controls map to ISO/IEC 17025:2017 - General Requirements for Testing and Calibration. Pre-computed mappings, identified gaps, and coverage analysis.
Need this as a report you can hand to an assessor? A coverage crosswalk for this pair can be built to order.
According to the TheArtOfService Compliance Knowledge Graph:
IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) maps to ISO/IEC 17025:2017 - General Requirements for Testing and Calibration with 27% coverage across 3 directly mapped controls. Analysis of 11 IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) controls identifies 8 compliance gaps, primarily concentrated in IAEA NSS-17 Assurance + Regulator + Improvement.
Source: TheArtOfService Knowledge Graph | 11 controls analysed | 686 frameworks | 309K+ cross-framework mappings
Control Mappings
Showing 6 of 6 mapped controls across 3 domains. Sign up to explore all 309K+ mappings across 686 frameworks.
IAEA NSS-17 Access Control(2 mappings)
IAEA NSS-17 Architecture + Zones(2 mappings)
IAEA NSS-17 Supply Chain + Third Party(2 mappings)
A IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) to ISO/IEC 17025:2017 - General Requirements for Testing and Calibration crosswalk, built to order
The table above lists candidate mappings. A crosswalk answers the narrower question you are probably here for: which ISO/IEC 17025:2017 - General Requirements for Testing and Calibration controls your existing IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) work already satisfies, which are real gaps, and the reasoning behind every claim so you can check it. One pair, $299, one time.
This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.
If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.
This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.
If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.
- Every evidenced control, with the reasoning behind it
- Every gap, with what it requires
- Its level of review stated plainly, not a bare number
Why this page shows two different percentages. The 27% in the header counts how many IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) controls carry at least one candidate mapping in the graph, before any review. The crosswalk percentage counts something stricter: how many ISO/IEC 17025:2017 - General Requirements for Testing and Calibration controls are actually evidenced, after a pass that argued against each mapping and kept only what survived. They answer different questions and they are not meant to agree.
A crosswalk narrows the work. It does not replace an audit, and your assessor may take a different view on individual controls. Mappings between frameworks are judgements, not text printed in either standard, which is why every claim in the report shows its reasoning. Questions go to support@theartofservice.com.
Related Comparisons
Other IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) comparisons
Other ISO/IEC 17025:2017 - General Requirements for Testing and Calibration comparisons
Stop Paying Consultants to Read Spreadsheets
AI-powered compliance intelligence across 686 frameworks, at a fraction of consulting costs.
Free
- ✓ 686 framework browser
- ✓ Cross-framework mappings (309K+)
- ✓ 824 compliance assessments
- ✓ 3 AI queries & searches per day
Professional
- ✓ Unlimited AI Compliance Advisory
- ✓ Unlimited full-text search
- ✓ Framework self-assessment
- ✓ PDF, Excel & CSV exports
What are the key differences between IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) and ISO/IEC 17025:2017 - General Requirements for Testing and Calibration?
IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) has 11 controls across its framework, while ISO/IEC 17025:2017 - General Requirements for Testing and Calibration covers 74 controls. Direct mapping analysis identifies 3 overlapping controls (27% coverage). The frameworks diverge most significantly in IAEA NSS-17 Assurance + Regulator + Improvement, where 1 IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) controls have no direct ISO/IEC 17025:2017 - General Requirements for Testing and Calibration equivalent.
How many controls map between IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) and ISO/IEC 17025:2017 - General Requirements for Testing and Calibration?
Of 11 total IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) controls, 3 map directly to ISO/IEC 17025:2017 - General Requirements for Testing and Calibration controls, representing 27% coverage. The remaining 8 controls represent compliance gaps requiring additional documentation or compensating controls to satisfy both frameworks simultaneously.
What are the compliance gaps when mapping IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) to ISO/IEC 17025:2017 - General Requirements for Testing and Calibration?
8 IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) controls have no direct equivalent in ISO/IEC 17025:2017 - General Requirements for Testing and Calibration. The highest concentration of gaps is in IAEA NSS-17 Assurance + Regulator + Improvement with 1 unmapped controls. These gaps represent areas where additional controls, policies, or documentation must be created to achieve compliance with both frameworks.
Which control domains have the most gaps between IAEA Nuclear Security Series - Computer Security at Nuclear Facilities (NSS-17-T Rev 1) and ISO/IEC 17025:2017 - General Requirements for Testing and Calibration?
The domain with the highest gap count is IAEA NSS-17 Assurance + Regulator + Improvement (1 gaps). Export the full domain-by-domain gap breakdown via the Professional tier to generate a prioritised remediation roadmap.
Related Resources
This platform provides educational compliance tools, not legal, regulatory, or professional compliance advice. Cross-framework mappings are AI-assisted interpretations and do not reproduce or replace official standards. Framework names and trademarks belong to their respective owners. Consult qualified professionals for your specific compliance requirements. See our Terms of Service.