EPA RCRA Hazardous Waste ManagementvsOSHA General Industry Standards (29 CFR Part 1910)
See exactly how EPA RCRA Hazardous Waste Management controls map to OSHA General Industry Standards (29 CFR Part 1910). Pre-computed mappings, identified gaps, and coverage analysis.
Need this as a report you can hand to an assessor? A coverage crosswalk for this pair can be built to order.
According to the TheArtOfService Compliance Knowledge Graph:
EPA RCRA Hazardous Waste Management maps to OSHA General Industry Standards (29 CFR Part 1910) with 6% coverage across 12 directly mapped controls. Analysis of 185 EPA RCRA Hazardous Waste Management controls identifies 201 compliance gaps, primarily concentrated in Part 264 Subparts I to FF: Unit-specific standards – EPA RCRA Hazardous Waste Management.
Source: TheArtOfService Knowledge Graph | 185 controls analysed | 849 frameworks | 314K+ cross-framework mappings
Control Mappings
Showing 12 of 12 mapped controls across 7 domains. Sign up to explore all 314K+ mappings across 849 frameworks.
Part 262 Subpart A: Generator determination, category and accumulation – EPA RCRA Hazardous Waste Management(1 mappings)
Part 262 Subpart K: Academic laboratories – EPA RCRA Hazardous Waste Management(1 mappings)
Part 262 Subpart M: LQG preparedness, prevention and emergency procedures – EPA RCRA Hazardous Waste Management(3 mappings)
Part 264 Subpart B: General facility standards – EPA RCRA Hazardous Waste Management(2 mappings)
Part 264 Subparts I to FF: Unit-specific standards – EPA RCRA Hazardous Waste Management(1 mappings)
Part 264 Subpart C: Preparedness and prevention – EPA RCRA Hazardous Waste Management(3 mappings)
Part 264 Subpart D: Contingency plan and emergency procedures – EPA RCRA Hazardous Waste Management(1 mappings)
A EPA RCRA Hazardous Waste Management to OSHA General Industry Standards (29 CFR Part 1910) crosswalk, built to order
The table above lists candidate mappings. A crosswalk answers the narrower question you are probably here for: which OSHA General Industry Standards (29 CFR Part 1910) controls your existing EPA RCRA Hazardous Waste Management work already satisfies, which are real gaps, and the reasoning behind every claim so you can check it. One pair, $299, one time.
This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.
If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.
This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.
If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.
- Every evidenced control, with the reasoning behind it
- Every gap, with what it requires
- Its level of review stated plainly, not a bare number
Why this page shows two different percentages. The 6% in the header counts how many EPA RCRA Hazardous Waste Management controls carry at least one candidate mapping in the graph, before any review. The crosswalk percentage counts something stricter: how many OSHA General Industry Standards (29 CFR Part 1910) controls are actually evidenced, after a pass that argued against each mapping and kept only what survived. They answer different questions and they are not meant to agree.
A crosswalk narrows the work. It does not replace an audit, and your assessor may take a different view on individual controls. Mappings between frameworks are judgements, not text printed in either standard, which is why every claim in the report shows its reasoning. Questions go to support@theartofservice.com.
Related Comparisons
Other EPA RCRA Hazardous Waste Management comparisons
Other OSHA General Industry Standards (29 CFR Part 1910) comparisons
Stop Paying Consultants to Read Spreadsheets
Cross-framework mappings across 849 frameworks, at a fraction of consulting costs.
Free
- ✓ 849 framework browser
- ✓ Cross-framework mappings (314K+)
- ✓ 824 compliance assessments
- ✓ 3 AI queries & searches per day
Professional
- ✓ Unlimited AI Compliance Advisory
- ✓ Unlimited full-text search
- ✓ Framework self-assessment
- ✓ PDF, Excel & CSV exports
What are the key differences between EPA RCRA Hazardous Waste Management and OSHA General Industry Standards (29 CFR Part 1910)?
EPA RCRA Hazardous Waste Management has 185 controls across its framework, while OSHA General Industry Standards (29 CFR Part 1910) covers 161 controls. Direct mapping analysis identifies 12 overlapping controls (6% coverage). The frameworks diverge most significantly in Part 264 Subparts I to FF: Unit-specific standards – EPA RCRA Hazardous Waste Management, where 31 EPA RCRA Hazardous Waste Management controls have no direct OSHA General Industry Standards (29 CFR Part 1910) equivalent.
How many controls map between EPA RCRA Hazardous Waste Management and OSHA General Industry Standards (29 CFR Part 1910)?
Of 185 total EPA RCRA Hazardous Waste Management controls, 12 map directly to OSHA General Industry Standards (29 CFR Part 1910) controls, representing 6% coverage. The remaining 201 controls represent compliance gaps requiring additional documentation or compensating controls to satisfy both frameworks simultaneously.
What are the compliance gaps when mapping EPA RCRA Hazardous Waste Management to OSHA General Industry Standards (29 CFR Part 1910)?
201 EPA RCRA Hazardous Waste Management controls have no direct equivalent in OSHA General Industry Standards (29 CFR Part 1910). The highest concentration of gaps is in Part 264 Subparts I to FF: Unit-specific standards – EPA RCRA Hazardous Waste Management with 31 unmapped controls. These gaps represent areas where additional controls, policies, or documentation must be created to achieve compliance with both frameworks.
Which control domains have the most gaps between EPA RCRA Hazardous Waste Management and OSHA General Industry Standards (29 CFR Part 1910)?
The domain with the highest gap count is Part 264 Subparts I to FF: Unit-specific standards – EPA RCRA Hazardous Waste Management (31 gaps). Export the full domain-by-domain gap breakdown via the Professional tier to generate a prioritised remediation roadmap.
Related Resources
This platform provides educational compliance tools, not legal, regulatory, or professional compliance advice. Cross-framework mappings are AI-assisted interpretations and do not reproduce or replace official standards. Framework names and trademarks belong to their respective owners. Consult qualified professionals for your specific compliance requirements. See our Terms of Service.