What does R1170 require?

Unfired pressure vessels (closed vessels other than boilers holding steam, hot water, gas or air, excluding portable gas cylinders) follow the permit, application and inspection provisions of Rule 1162 with the vessel in place of the boiler. Construction materials, fittings and attachments meet the Rule 1162.01 standards, vessels are designed for their intended use and local conditions, each is accompanied by the manufacturer's certificate of technical specifications, locally fabricated vessels need a permit application with designs in five copies, installation leaves all parts accessible for inspection, safety valves on vessels fed from an outside source protect the system against over-pressure, installation plans follow Rule 1168, and the permissible working pressure is reduced to keep a factor of safety of at least five when inspection shows deterioration. Liquefied petroleum gas vessels and other cylinders, closed and open steam-heated vessels, water and air pressure tanks, refrigeration tanks and compressors follow Rules 1173 to 1179.

Philippines Occupational Safety and Health Standards...

Other controls in Rules 1100 to 1240: Welding, confined spaces, explosives, materials handling, boilers, pressure vessels, internal combustion engines, machine guarding, electrical safety, elevators, piping identification, power piping – Philippines Occupational Safety and Health Standards

R1100 Rule 1100 Welding and cutting: no hot work near combustibles, explosives or flammable atmospheres until hazards are removed, no welding on containers that held flammables unless cleaned, inerted or water-filled, opaque screens at least 2 metres high where others work or pass, a portable extinguisher at hand, a written permit from the safety man in large establishments, welders' PPE, and ventilation or respirators in confined spaces
R1120 Rule 1120 Hazardous work processes: before entering an underground tank or similar confined space, water level checked, air tested for explosive gases, oxygen and carbon monoxide, blower ventilation where levels are abnormal, breathing apparatus available, a watcher in regular contact with equivalent apparatus, no smoking or open flames until fire risk is cleared, no solvent spraying without protection, openings barricaded and lit, and adequate means of entry and exit
R1140 Rule 1140 Explosives: manufacture, handling and storage only in approved places, buildings used for nothing else, quantity and distance tables, magazine construction and storage rules, records of disposition, and the Fire Code applied to transport and storage
R1150 Rule 1150 Materials handling and storage: safe clearances and marked aisles for mechanical handling, tiered storage stacked, blocked and limited in height, storage areas free of trip, fire, explosion and pest hazards, clearance signs, derails on spur tracks, and covers or guardrails on open pits, tanks and vats
R1160 Rule 1160 Boilers: no boiler installed or operated without the Secretary's permit, applications with manufacturer data and plans, cleared repairs, transfer reporting within thirty days, boiler room construction and clearances, power and heating boiler requirements, cleaning and repair precautions, PPE, colour coding and plan preparation
R1180 Rule 1180 Internal combustion engines: coverage of generators, standby units, prime movers and construction and agricultural engines, the PSME Code and Rule 1060 as minimum standards, inspection at foundation, before service, after modification and at least every twelve months with the owner's engineer, engine room and building requirements, installation plans and portable engines
R1200 Rule 1200 Machine guarding: all moving parts of prime movers and transmission equipment and all dangerous parts of driven machinery effectively guarded, built-in safety specified when ordering and ensured by manufacturers, vendors and installers, guards removed only when authorised with the machine stopped and reinstalled before use, standard guard construction, point-of-operation guards, transmission guarding, woodworking machinery and power presses
R1210 Rule 1210 Electrical safety: the Philippine Electrical Code adopted as the safety standard, no installation without plans approved by the Secretary and prepared by a licensed professional electrical engineer, no energisation until final inspection and a safety certificate or permit, periodic inspection, inspection fees and plan preparation requirements

Query this from an agent

The graph holds this control, the 0 it maps to, and the evidence behind each claim, over MCP and REST.

MCP endpoint All Philippines Occupational Safety and Health Standards controls