What does R1150 require?

Where mechanical handling equipment operates, enough safe clearance is left in aisles, at loading docks, at doorways and wherever a turn is made, and aisles and passageways are kept clear, in good repair and marked. Stored material creates no hazard: bags, containers and bundles stored in tiers are stacked and blocked, interlocked and kept low enough to stay stable, storage areas are kept free of accumulations that create tripping, fire, explosion or pest hazards with vegetation controlled, clearance limit signs are posted, derails or bumper blocks protect spur railroad tracks, and covers or guardrails protect people from open pits, tanks, vats and ditches.

Philippines Occupational Safety and Health Standards...

Other controls in Rules 1100 to 1240: Welding, confined spaces, explosives, materials handling, boilers, pressure vessels, internal combustion engines, machine guarding, electrical safety, elevators, piping identification, power piping – Philippines Occupational Safety and Health Standards

R1100 Rule 1100 Welding and cutting: no hot work near combustibles, explosives or flammable atmospheres until hazards are removed, no welding on containers that held flammables unless cleaned, inerted or water-filled, opaque screens at least 2 metres high where others work or pass, a portable extinguisher at hand, a written permit from the safety man in large establishments, welders' PPE, and ventilation or respirators in confined spaces
R1120 Rule 1120 Hazardous work processes: before entering an underground tank or similar confined space, water level checked, air tested for explosive gases, oxygen and carbon monoxide, blower ventilation where levels are abnormal, breathing apparatus available, a watcher in regular contact with equivalent apparatus, no smoking or open flames until fire risk is cleared, no solvent spraying without protection, openings barricaded and lit, and adequate means of entry and exit
R1140 Rule 1140 Explosives: manufacture, handling and storage only in approved places, buildings used for nothing else, quantity and distance tables, magazine construction and storage rules, records of disposition, and the Fire Code applied to transport and storage
R1160 Rule 1160 Boilers: no boiler installed or operated without the Secretary's permit, applications with manufacturer data and plans, cleared repairs, transfer reporting within thirty days, boiler room construction and clearances, power and heating boiler requirements, cleaning and repair precautions, PPE, colour coding and plan preparation
R1170 Rule 1170 Unfired pressure vessels: the boiler permit and application regime applied to pressure vessels, manufacturer's certificates, accessible installation, protected safety valves, a factor of safety of five, and specific requirements for LPG and other cylinders, steam-heated, water and air pressure, refrigeration tanks and compressors
R1180 Rule 1180 Internal combustion engines: coverage of generators, standby units, prime movers and construction and agricultural engines, the PSME Code and Rule 1060 as minimum standards, inspection at foundation, before service, after modification and at least every twelve months with the owner's engineer, engine room and building requirements, installation plans and portable engines
R1200 Rule 1200 Machine guarding: all moving parts of prime movers and transmission equipment and all dangerous parts of driven machinery effectively guarded, built-in safety specified when ordering and ensured by manufacturers, vendors and installers, guards removed only when authorised with the machine stopped and reinstalled before use, standard guard construction, point-of-operation guards, transmission guarding, woodworking machinery and power presses
R1210 Rule 1210 Electrical safety: the Philippine Electrical Code adopted as the safety standard, no installation without plans approved by the Secretary and prepared by a licensed professional electrical engineer, no energisation until final inspection and a safety certificate or permit, periodic inspection, inspection fees and plan preparation requirements

Query this from an agent

The graph holds this control, the 0 it maps to, and the evidence behind each claim, over MCP and REST.

MCP endpoint All Philippines Occupational Safety and Health Standards controls