What does R1160 require?

No boiler is installed or operated in the Philippines without a permit issued by the Secretary of Labor or an authorised representative. Applications to install a new boiler are filed with the Bureau or Regional Office with the maker's data sheets, the working drawings, the foundation design and the installation and location plans in five copies, applications to fabricate locally are filed with design drawings and computations, major repairs to pressure parts are cleared in advance by the Bureau or the Regional Office and the boiler is not used afterwards without a permit, and any removal, relocation or change of ownership is reported by old and new owners within thirty days. Power boiler rooms have at least 100 cm clearance, two independent doors and fire-resistant construction or separation as Rule 1163 requires, with no openings into rooms where flammables are handled; power boilers, heating boilers, cleaning and repair, personal protective equipment, colour coding and the plan requirements for boilers and pressure vessels follow Rules 1163 to 1168, including the periodic inspections and tests on which the permit depends.

Philippines Occupational Safety and Health Standards...

Other controls in Rules 1100 to 1240: Welding, confined spaces, explosives, materials handling, boilers, pressure vessels, internal combustion engines, machine guarding, electrical safety, elevators, piping identification, power piping – Philippines Occupational Safety and Health Standards

R1100 Rule 1100 Welding and cutting: no hot work near combustibles, explosives or flammable atmospheres until hazards are removed, no welding on containers that held flammables unless cleaned, inerted or water-filled, opaque screens at least 2 metres high where others work or pass, a portable extinguisher at hand, a written permit from the safety man in large establishments, welders' PPE, and ventilation or respirators in confined spaces
R1120 Rule 1120 Hazardous work processes: before entering an underground tank or similar confined space, water level checked, air tested for explosive gases, oxygen and carbon monoxide, blower ventilation where levels are abnormal, breathing apparatus available, a watcher in regular contact with equivalent apparatus, no smoking or open flames until fire risk is cleared, no solvent spraying without protection, openings barricaded and lit, and adequate means of entry and exit
R1140 Rule 1140 Explosives: manufacture, handling and storage only in approved places, buildings used for nothing else, quantity and distance tables, magazine construction and storage rules, records of disposition, and the Fire Code applied to transport and storage
R1150 Rule 1150 Materials handling and storage: safe clearances and marked aisles for mechanical handling, tiered storage stacked, blocked and limited in height, storage areas free of trip, fire, explosion and pest hazards, clearance signs, derails on spur tracks, and covers or guardrails on open pits, tanks and vats
R1170 Rule 1170 Unfired pressure vessels: the boiler permit and application regime applied to pressure vessels, manufacturer's certificates, accessible installation, protected safety valves, a factor of safety of five, and specific requirements for LPG and other cylinders, steam-heated, water and air pressure, refrigeration tanks and compressors
R1180 Rule 1180 Internal combustion engines: coverage of generators, standby units, prime movers and construction and agricultural engines, the PSME Code and Rule 1060 as minimum standards, inspection at foundation, before service, after modification and at least every twelve months with the owner's engineer, engine room and building requirements, installation plans and portable engines
R1200 Rule 1200 Machine guarding: all moving parts of prime movers and transmission equipment and all dangerous parts of driven machinery effectively guarded, built-in safety specified when ordering and ensured by manufacturers, vendors and installers, guards removed only when authorised with the machine stopped and reinstalled before use, standard guard construction, point-of-operation guards, transmission guarding, woodworking machinery and power presses
R1210 Rule 1210 Electrical safety: the Philippine Electrical Code adopted as the safety standard, no installation without plans approved by the Secretary and prepared by a licensed professional electrical engineer, no energisation until final inspection and a safety certificate or permit, periodic inspection, inspection fees and plan preparation requirements

Query this from an agent

The graph holds this control, the 0 it maps to, and the evidence behind each claim, over MCP and REST.

MCP endpoint All Philippines Occupational Safety and Health Standards controls