PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built EnvironmentsvsISO/SAE 21434
See exactly how PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments controls map to ISO/SAE 21434. Pre-computed mappings, identified gaps, and coverage analysis.
Need this as a report you can hand to an assessor? A coverage crosswalk for this pair can be built to order.
According to the TheArtOfService Compliance Knowledge Graph:
PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments maps to ISO/SAE 21434 with 50% coverage across 3 directly mapped controls. Analysis of 6 PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments controls identifies 3 compliance gaps, primarily concentrated in Supply Chain and Physical.
Source: TheArtOfService Knowledge Graph | 6 controls analysed | 686 frameworks | 310K+ cross-framework mappings
Control Mappings
Showing 11 of 11 mapped controls across 3 domains. Sign up to explore all 310K+ mappings across 686 frameworks.
Triage and Classification(1 mappings)
Technical Controls(9 mappings)
Incident Response and Lifecycle(1 mappings)
A PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments to ISO/SAE 21434 crosswalk, built to order
The table above lists candidate mappings. A crosswalk answers the narrower question you are probably here for: which ISO/SAE 21434 controls your existing PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments work already satisfies, which are real gaps, and the reasoning behind every claim so you can check it. One pair, $299, one time.
This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.
If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.
This direction has not been through crosswalk review and sign off, so no coverage figure is published for it. Reporting an unreviewed number would be worse than reporting none. It can be built to order at the same price as a pair that is already on the shelf.
If the two frameworks turn out to have too little in common for a crosswalk to help you, we say so and refund it rather than send a number worth nothing.
- Every evidenced control, with the reasoning behind it
- Every gap, with what it requires
- Its level of review stated plainly, not a bare number
Why this page shows two different percentages. The 50% in the header counts how many PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments controls carry at least one candidate mapping in the graph, before any review. The crosswalk percentage counts something stricter: how many ISO/SAE 21434 controls are actually evidenced, after a pass that argued against each mapping and kept only what survived. They answer different questions and they are not meant to agree.
A crosswalk narrows the work. It does not replace an audit, and your assessor may take a different view on individual controls. Mappings between frameworks are judgements, not text printed in either standard, which is why every claim in the report shows its reasoning. Questions go to support@theartofservice.com.
Related Comparisons
Other PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments comparisons
Other ISO/SAE 21434 comparisons
Stop Paying Consultants to Read Spreadsheets
AI-powered compliance intelligence across 686 frameworks, at a fraction of consulting costs.
Free
- ✓ 686 framework browser
- ✓ Cross-framework mappings (310K+)
- ✓ 824 compliance assessments
- ✓ 3 AI queries & searches per day
Professional
- ✓ Unlimited AI Compliance Advisory
- ✓ Unlimited full-text search
- ✓ Framework self-assessment
- ✓ PDF, Excel & CSV exports
What are the key differences between PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments and ISO/SAE 21434?
PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments has 6 controls across its framework, while ISO/SAE 21434 covers 50 controls. Direct mapping analysis identifies 3 overlapping controls (50% coverage). The frameworks diverge most significantly in Supply Chain and Physical, where 1 PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments controls have no direct ISO/SAE 21434 equivalent.
How many controls map between PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments and ISO/SAE 21434?
Of 6 total PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments controls, 3 map directly to ISO/SAE 21434 controls, representing 50% coverage. The remaining 3 controls represent compliance gaps requiring additional documentation or compensating controls to satisfy both frameworks simultaneously.
What are the compliance gaps when mapping PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments to ISO/SAE 21434?
3 PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments controls have no direct equivalent in ISO/SAE 21434. The highest concentration of gaps is in Supply Chain and Physical with 1 unmapped controls. These gaps represent areas where additional controls, policies, or documentation must be created to achieve compliance with both frameworks.
Which control domains have the most gaps between PAS 1192-5:2015 - Security-Minded Approach to BIM and Digital Built Environments and ISO/SAE 21434?
The domain with the highest gap count is Supply Chain and Physical (1 gaps). Export the full domain-by-domain gap breakdown via the Professional tier to generate a prioritised remediation roadmap.
Related Resources
This platform provides educational compliance tools, not legal, regulatory, or professional compliance advice. Cross-framework mappings are AI-assisted interpretations and do not reproduce or replace official standards. Framework names and trademarks belong to their respective owners. Consult qualified professionals for your specific compliance requirements. See our Terms of Service.