What does 87-88 require?

Where work is done inside a confined space it has adequate means of exit and nobody enters unless all practicable steps have removed fumes and a suitable test confirms no dangerous fumes remain and the entrant wears a belt attached to a rope held by someone outside, or the person wears suitable breathing apparatus; enough workers trained in breathing and reviving apparatus, belts, ropes and restoring respiration are readily available; no employee enters or stays in a chamber, tank or vat, pit, pipe or flue or similar space without an adequate air supply that renders fumes harmless or suitable breathing apparatus; and unless other adequate access exists the space has a manhole of at least 45 by 40 centimetres or 45 centimetres diameter (40 by 35 centimetres or 40 centimetres diameter for tank wagons and mobile plant). Where ammonia, chlorine, carbon dioxide or any other gas or vapour that asphyxiates or irritates is present or could be, all practicable measures, by locating the plant elsewhere, ventilation or other means, prevent danger to health, and Commissioner-approved breathing apparatus or other equipment is provided, maintained and kept readily available for rescue and for making premises or operations safe.

Uganda Occupational Safety and Health Act 2006 87-88...

Other controls in Parts XII and XIII: Hazardous materials and chemical safety (sections 83 to 98) – Uganda Occupational Safety and Health Act 2006

83-84 Explosive dust, hot work on vessels and electrical apparatus: enclosure of dust-producing plant, removal of escaped dust and exclusion of ignition sources, chokes, baffles and vents on plant not built to withstand an explosion, no welding, brazing, soldering or heat cutting on plant, tanks or vessels that hold or held explosive or inflammable substances until the substance and fumes are removed or made safe and no refilling until the metal has cooled, and electrical apparatus, fittings and conductors adequate for their work and constructed, installed, protected, worked and maintained to prevent danger
85-86 Toxic materials and drenching facilities: toxic materials used only where non-toxic alternatives are not reasonably practicable, exposed numbers minimised and antidotes kept where recognised, work with toxic materials only under an efficient exhaust draught that prevents dangerous escape, no eating, drinking or smoking where ingestion is a risk, washing facilities near the point of use, and on the Commissioner's notice additional bathing facilities, periodic medical examinations and protective clothing; where dangerous or corrosive liquids are used, readily accessible means of drenching with water and clearly signed eye-flushing facilities
89-90 Heavy loads and radiation: no worker required to lift, carry or move a load heavy enough to be likely to injure them; effective practicable measures to restrict exposure to ionising radiation, exposure to ionising radiation, lasers, ultraviolet, infrared and other electromagnetic radiation and to vibration including ultrasonic vibration kept to no more than reasonably necessary with everything practicable done to minimise it
91-92 Personal protective equipment and eye protection: where a process is likely to cause bodily injury that other means cannot prevent, suitable personal protective equipment and clothing for every worker at risk, supplied and maintained free of charge with instructions for use; goggles or effective screens for the Schedule 8 processes; and screening against electric arc flash for people other than the welders
95 General precautions in handling chemicals: administrative and technical measures to keep contamination of the work environment to the lowest possible level or at least within the Commissioner's exposure limits, substitution by harmless or less harmful substances, isolation of contaminating operations, enclosed systems for very hazardous substances, automatic or remote processes to avoid direct contact, dangerous operations only by authorised and trained workers with refreshed training, and full hazard awareness and protective equipment for workers who must enter contaminated atmospheres
96-97 Chemical safety data sheets and labelling: manufacturers and importers provide employers with chemical safety data sheets giving identity, supplier, classification, hazards, precautions and emergency procedures, and the employer forwards a copy of each to the Commissioner; the employer ensures packages of hazardous chemicals delivered to the workplace are labelled and accompanied by the data sheet, keeps a register of data sheets at the workplace, and gives copies of the sheets and the register to the workers concerned and their representatives for consultation at any time
98 Duties of suppliers, manufacturers, importers and distributors: machines, process plant, instruments and vehicles designed and supplied in a suitable condition with the relevant information so that their operation and use contaminate the work environment as little as possible and pose no health hazard during production, maintenance and other activities; all chemicals classified by their toxic, chemical, physical, corrosive, irritant, allergenic, sensitising, carcinogenic, teratogenic, mutagenic and reproductive properties; containers marked for identity and labelled uniformly with legible, durable labels easily understood by workers, UN-system labelling sufficing

Query this from an agent

The graph holds this control, the 0 it maps to, and the evidence behind each claim, over MCP and REST.

MCP endpoint All Uganda Occupational Safety and Health Act 2006 controls