What does 85-86 require?

Toxic materials or substances are used only where a non-toxic alternative is not reasonably practicable; wherever they are present or in use, as few workers as possible are exposed and stocks of any recognised antidote are kept at hand; all work on or with toxic materials happens under an efficient exhaust draught, built, placed and maintained so that the materials cannot escape into the air to a dangerous degree; where ingestion is a risk nobody eats, drinks or smokes in any workroom or place where the material is handled; washing facilities are provided and maintained conveniently near the place of use where body contamination is a risk; and on notice from the Commissioner the occupier or employer adds bathing facilities, showers included where practicable, periodic medical examinations and additional protective clothing. Wherever dangerous or corrosive liquids are in use, adequate water-drenching facilities within easy reach for anyone splashed, and enough suitable eye-flushing or irrigation points, conveniently placed and marked by a distinctive sign visible at all times, are provided and maintained for emergencies.

Uganda Occupational Safety and Health Act 2006 85-86...

Other controls in Parts XII and XIII: Hazardous materials and chemical safety (sections 83 to 98) – Uganda Occupational Safety and Health Act 2006

83-84 Explosive dust, hot work on vessels and electrical apparatus: enclosure of dust-producing plant, removal of escaped dust and exclusion of ignition sources, chokes, baffles and vents on plant not built to withstand an explosion, no welding, brazing, soldering or heat cutting on plant, tanks or vessels that hold or held explosive or inflammable substances until the substance and fumes are removed or made safe and no refilling until the metal has cooled, and electrical apparatus, fittings and conductors adequate for their work and constructed, installed, protected, worked and maintained to prevent danger
87-88 Confined spaces and asphyxiant gases: adequate means of exit, entry only after fumes are removed and a test shows the space is free of dangerous fumes with a belt and rope held from outside, or with suitable breathing apparatus, assured air supply, trained rescuers with breathing and reviving apparatus readily available, manholes of the prescribed minimum dimensions; and where ammonia, chlorine, carbon dioxide or other asphyxiant or irritant gases may be present, relocation, ventilation or other measures to remove the danger and approved breathing apparatus kept ready for rescue and making premises safe
89-90 Heavy loads and radiation: no worker required to lift, carry or move a load heavy enough to be likely to injure them; effective practicable measures to restrict exposure to ionising radiation, exposure to ionising radiation, lasers, ultraviolet, infrared and other electromagnetic radiation and to vibration including ultrasonic vibration kept to no more than reasonably necessary with everything practicable done to minimise it
91-92 Personal protective equipment and eye protection: where a process is likely to cause bodily injury that other means cannot prevent, suitable personal protective equipment and clothing for every worker at risk, supplied and maintained free of charge with instructions for use; goggles or effective screens for the Schedule 8 processes; and screening against electric arc flash for people other than the welders
95 General precautions in handling chemicals: administrative and technical measures to keep contamination of the work environment to the lowest possible level or at least within the Commissioner's exposure limits, substitution by harmless or less harmful substances, isolation of contaminating operations, enclosed systems for very hazardous substances, automatic or remote processes to avoid direct contact, dangerous operations only by authorised and trained workers with refreshed training, and full hazard awareness and protective equipment for workers who must enter contaminated atmospheres
96-97 Chemical safety data sheets and labelling: manufacturers and importers provide employers with chemical safety data sheets giving identity, supplier, classification, hazards, precautions and emergency procedures, and the employer forwards a copy of each to the Commissioner; the employer ensures packages of hazardous chemicals delivered to the workplace are labelled and accompanied by the data sheet, keeps a register of data sheets at the workplace, and gives copies of the sheets and the register to the workers concerned and their representatives for consultation at any time
98 Duties of suppliers, manufacturers, importers and distributors: machines, process plant, instruments and vehicles designed and supplied in a suitable condition with the relevant information so that their operation and use contaminate the work environment as little as possible and pose no health hazard during production, maintenance and other activities; all chemicals classified by their toxic, chemical, physical, corrosive, irritant, allergenic, sensitising, carcinogenic, teratogenic, mutagenic and reproductive properties; containers marked for identity and labelled uniformly with legible, durable labels easily understood by workers, UN-system labelling sufficing

Query this from an agent

The graph holds this control, the 0 it maps to, and the evidence behind each claim, over MCP and REST.

MCP endpoint All Uganda Occupational Safety and Health Act 2006 controls