ISO 45001:2018 6.1.2.2: Assessment of OH&S risks and other risks to the OH&S MS

What else in your programme already covers this

This control maps to 15 controls across 8 other frameworks. If you already hold one of them, the evidence you collected for it is the starting point here rather than new work.

ANSI/ASIS WVPI AA-2020 Workplace Violence and Active Assailant · 3 controls

6.1.1 6.1.1 General approach
8.3.1 8.3.1 Objectives of the threat assessment
8.3.2 8.3.2 Information relevant to the threat assessment

Australia Model Work Health and Safety Regulations · 3 controls

r529CA r 529CA Assess and record whether CSS processing is high risk
r555 r 555 Conduct and document a comprehensive safety assessment
r65-66 rr 65 and 66 No entry before compliance; competent person's written risk assessment

IATA Operational Safety Audit (IOSA) Standards Manual · 3 controls

FLT 3.3 FLT 3.3 Flight Crew Qualifications
ORG 3.2 ORG 3.2 Risk Assessment and Mitigation
ORG 3.4 ORG 3.4 Specific Risk Assessments

Australia Model Code of Practice: Managing the Risk of Falls at Workplaces · 2 controls

3.1 3.1 Use risk assessment where it helps decide fall controls
3.3 3.3 Assess fall risks against the listed factors, and keep generic assessments current

Australia Model Code of Practice: Construction Work · 1 control

3.2 3.2 Assess risks where it helps decide controls

GLOBALG.A.P. Integrated Farm Assurance (IFA) Standard v6 · 1 control

FV-GFS 20.01.01 FV-GFS 20.01.01 There is a documented risk assessment for workers’ health and safety.

ISO 19650 - Organisation and Digitisation of Information about Buildings and Civil Engineering Works (BIM) · 1 control

6:4.2.4 4.2.4 Health and safety risk prioritization

ISO 45003:2021 · 1 control

6.1.2 6.1.2 Hazard identification and assessment of risks and opportunities

Every mapping shown was judged rather than inferred from wording similarity, and the ones that failed review are published too. See the coverage reports and what was rejected.