What does P29 require?

The owner of a tool ensures it is of good material fit for its use, inspected before use and repaired or replaced as needed, and meets the other requirements of section 29.2. The employer ensures workers are competent and given proper instruction and training in using safely the hand tools of their work, that portable power tools are inspected at regular intervals with defective tools removed until repaired, and the other section 29.6 conditions such as guarding and grounding. Users handle tools safely, inspect them before use, do not use defective tools and follow section 29.5; workers using power tools wear eye protection, wear dust respirators when buffing, grinding or sanding hazardous material and the other protection section 29.7 names; and no worker wears gloves, a tie, loose garments or jewellery when using a revolving power tool, or does the other acts section 29.8 prohibits.

Prince Edward Island Occupational Health and Safety Act...

Other controls in Parts 29 to 37: Tools, machinery, repairs, pile driving, powered mobile equipment, hoisting, hoists, electricity and welding – Prince Edward Island Occupational Health and Safety Act General Regulations

P30 Mechanical safety: moving parts safeguarded, machinery installed and operated to manufacturer's specifications, identified and protected controls, accessible stops, lock-out disconnects, servicing only after isolation, working space, specific safeguards for drives and nip points, abrasive wheels, cutting machinery, saws, tumblers, agitators and conveyors
P31-32 Repairs to machinery and pile driving: daily inspection of power-operated machinery, no use during repair, isolation and lock during repair, tyre and rim precautions, and pile driver hose, line and hammer safeguards
P33 Powered mobile equipment: maintained and operated safely by the employer and inspected by operators each shift, ROPS and FOPS to CSA B352.0, seat belts, brakes and warning devices, signallers where vision is obstructed, pedestrian separation, dust control, certified attachments, blocking of raised equipment, lock bars at articulation points, slope precautions, gear downhill, tyre inflation, enclosed seating for transported workers, and no riding in cabs being loaded
P34 Hoisting apparatus: adequate construction and fittings, safe load capacity obtained and posted, never overloaded, maintained and inspected and tested by a competent person, prescribed operating procedures and barriers, movement only on a designated signaller's signals, no riding on or standing under loads, mobile crane cab protection and stabilisers, boom precautions when travelling, and no building materials as counterweights
P35 Hoists: workers and materials never carried together, personnel hoists to CSA Z185 and material hoists to CSA Z256
P36 Electricity: only competent workers on energised conductors, Electrical Inspection Act compliance, protective devices, special procedures above 3,000 V, lock and tag de-energising and controlled re-energising, guards near live equipment, communication and insulated mats in manholes, water-free tunnels, clear access to switchgear, overhead barricades, pole setting near live conductors with two workers, limits of approach and utility contact, insulated metal-free ladders and insulated tools, temporary wiring and portable conductors, cords and grounding
P37 Welding, cutting and soldering: fume ventilation, no hot work near combustibles or flammable atmospheres without precautions, non-flammable supports, slag and spark control, screens and dark walls, extinguishing equipment at hand, fire retardant clothing and respirators, torch and regulator inspection, no hot work on enclosed or formerly flammable containers unless certified or cleaned, torch and cylinder handling, storage, upright securing, quick release and reverse-flow check valves

Query this from an agent

The graph holds this control, the 0 it maps to, and the evidence behind each claim, over MCP and REST.

MCP endpoint All Prince Edward Island Occupational Health and Safety Act General Regulations controls