NATO AQAP 2110 - Quality Assurance Requirements for Design, Development, and Production
5.3 Support – NATO AQAP 2110 - Quality Assurance Requirements for Design, Development, and Production

NATO AQAP 2110 - Quality Assurance Requirements for Design, Development, and Production 5.3.2: 5.3.2 Run the contract's measurement and calibration system to ISO 10012 and report calibration failures

For the contract, measurement and calibration are run to ISO 10012:2003. If a measuring instrument is found out of calibration, the Supplier tells the GQAR or Acquirer how the failure affects earlier measurement results where delivered product or verification, validation or acceptance results are affected, and the GQAR or Acquirer may require those measurements to be repeated with calibrated equipment. SRD.1: ISO 10012 brings a documented measurement management system, a metrological function, confirmation, uncertainty estimation and interval rules. SRD.2: beyond AS9100D 7.1.5 the Quality Plan should state which ISO 10012 requirements apply. Base clause: ISO 9001:2015 clause 7.1.5 (measuring resources).

Maintained by Gerard BlokdykVerified against the published standard Control text last updated

Other controls in 5.3 Support – NATO AQAP 2110 - Quality Assurance Requirements for Design, Development, and Production

Query this from an agent

The graph holds this control, the 0 it maps to, and the evidence behind each claim, over MCP and REST.

MCP endpointAll NATO AQAP 2110 - Quality Assurance Requirements for Design, Development, and Production controls