Australia Model Work Health and Safety Regulations
Part 8.3: Management of asbestos and associated risks – Australia Model Work Health and Safety Regulations

Australia Model Work Health and Safety Regulations r422-423: rr 422 and 423 Identify or assume asbestos, with samples analysed only by accredited laboratories

The person with management or control of a workplace ensures so far as reasonably practicable that all asbestos or ACM is identified by a competent person, assumes material is asbestos where it cannot be identified but a competent person reasonably believes it is, and assumes asbestos is present in inaccessible areas likely to contain it (identification is not needed where asbestos is assumed or there are reasonable grounds to believe none is present); any sample is analysed only by a NATA-accredited laboratory for the relevant method or a laboratory operated or approved by the regulator.

Maintained by Gerard Blokdyk

What else in your programme already covers this

This control maps to 1 controls across 1 other frameworks. If you already hold one of them, the evidence you collected for it is the starting point here rather than new work.

ISO 45001:2018 · 1 control

Every mapping shown was judged rather than inferred from wording similarity, and the ones that failed review are published too. See the coverage reports and what was rejected.

Other controls in Part 8.3: Management of asbestos and associated risks – Australia Model Work Health and Safety Regulations

Query this from an agent

The graph holds this control, the 1 it maps to, and the evidence behind each claim, over MCP and REST.